開發硬體可靠度設計查核表以應用於電子產品的設計

Development of a Hardware Design for Reliability Checklist for Electronic Product Design

阮氏葉草(Nguyen-Thi-Da Thao)

指導教授 ： 簡英哲

中原大學/電機資訊學院/工業與系統工程研究所/碩士(2013年)

https://doi.org/10.6840/cycu201300672

摘要

在產品開發階段，可靠度設計需要各個部門組成的開發團隊與供應商充分合作。為了確保產品功能績效與可靠度目標，能在最適時間，以合乎成本效益方式達成，一項以電子產品的可靠度設計程序而發展出的查核表應運而出。本研究所發展出的可靠度設計程序及其相關查核表，亦可經適當的轉換而適用於各種不同電子產業開發其新產品。

關鍵字

產品開發流程 ； 可靠度設計查核表 ； 可靠度設計

並列摘要

Design for Reliability (DFR) requires joint cooperation among many departments in product development team and suppliers during product development phase. In order to assure desired product functional performance and reliability targets can be established in the right time and cost effective manner, a checklist based on design for reliability process are developed in this research for electronic products. The DFR process and associated checklist for each process can be adopted with adequate changes for various electronic industries in their new product development.

並列關鍵字

Design for Reliability ； Product Development Process ； Design for Reliability Checklist

參考文獻

Asset Performance Management Supported by Reliability Engineering.

Bauer, Eric, “Design for reliability : information and computer-based systems” Hoboken, N.J. : Wiley-IEEE Press, c2010

Carlson, Sarakakis, Groebel, Mettas, 2010. Best Practices for Effective Reliability Program Plans. 978-1-4244-5103-6/10/$26.00 2010 IEEE.

Devnani, 2011. A study of preparation of checklists of various service departments of a tertiary care hospital. GRIN Verlag.

Dhillon, 2005. Reliability, Quality, and Safety for Engineering