添加奈米碳管之PLA小管徑人工血管支架性質及細胞相容性研究

Cell compatibility and properties of small-diameter synthetic PLA/CNT vascular scaffold

黃怡菁(Yi-Ching Huang)

指導教授 ： 徐瑞坤

國立交通大學/工學院/機械工程系所/碩士(2012年)

https://doi.org/10.6842/NCTU.2012.00466

摘要

本研究探討以聚乳酸為主要成份的具方向性纖維之小管徑人工血管支架的製作方法條件及其細胞培養時之相容性。作為血管壁細胞培養之支架須具備一定的彈性和撓性，及利於細胞附著、生長。本研究中，將奈米碳管先利用化學酸處理方法來改質，接著利用電氣紡絲法製備聚乳酸/奈米碳管之小管徑人工血管支架，分別探討奈米碳管酸處理前後以及不同濃度的奈米碳管，對小管徑人工血管支架纖維幾何特性、機械特性的影響，完成之血管支架再以內皮細胞佈施培養。
最終能在添加酸處理奈米碳管之血管支架纖維表面上產生多孔性、細胞培養上有卓越生長情形且在機械特性方面有較好的機械強度表現並且附有可撓性，實現一個適合細胞生長之小管徑人工血管支架。

關鍵字

電氣紡絲 ； 奈米碳管 ； 支架

並列摘要

In this study, we will develope the small-diameter artificial blood vessel with PLA as the main constituent within the aligned fibers, which has adequate strength as well as flexible, can facilitate cell adhesion and proliferation. The CNT were acid oxidated and added into the polymer solution, then PLA/CNT solution will be fabricated into the small-diameter vessell via electrospinning. The morphology of the fiber, mechanical properties and cell activity of the veaael with/without acid oxidated CNT and in different CNT concentration and with/without acid oxidated will be stuied.
Finally, artificial blood vessel which has appropriate porous and mechanical properties as well as flexible that can attract cells to adhesion and proliferation.

並列關鍵字

electrospun ； carbon nanotube ； scaffold

參考文獻

[57] 洪昭南、徐逸明、王宏達 ，｢奈米碳管結構及特性簡介｣，化工，第49卷第1 期，第23-30 頁，2002。

[22] 李宣書，「淺談組織工程」，物理雙月刊，第廿四卷第三期，430~435頁，2001年6月。

[26] Geoffrey Taylor, “Disintegration of Water Drops in an Electric Field”, Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, 280, 1382, pp. 383-397, The Royal Society, July 1964.

[29] Geoffrey Taylor, “Electrically Driven Jets”, Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, 313, 1515, pp. 453-475, The Royal Society, December 1969.

[43] Joel Stitzel, Jie Liu, Sang Jin Lee, Makoto Komura, Joel Berry, Shay Soker, Grace Lim, Mark Van Dyke, Richard Czerw, James J. Yoo, Anthony Atala, “Controlled fabrication of a biological vascular substitute”, Biomaterials, 27, 7, pp. 1088-1094, March 2008.