Title

螢光粉參數對於白光LED封裝效率之研究

Translated Titles

The studies of power efficiency with different phosphor parameters in white LEDs

Authors

鄭又瑄

Key Words

白光LED ; 矽酸鹽螢光粉 ; 封裝效率 ; silicate phosphor ; power efficiency ; white LED

PublicationName

中央大學光電科學研究所學位論文

Volume or Term/Year and Month of Publication

2011年

Academic Degree Category

碩士

Advisor

孫慶成

Content Language

繁體中文

Chinese Abstract

本篇論文我們針對矽酸鹽螢光粉濃度與厚度對於白光LED封裝效率的影響進行研究與分析。首先利用已建構之矽酸鹽螢光粉模型,以藍光雷射激發各種不同濃度與厚度的螢光粉薄片,分析其正向、側向及背向的能量,並以實驗驗證模擬結果,作為後續白光LED封裝效率比較的分析基礎。接著將激發光源改為藍光LED,在螢光粉遠離晶片的實驗架構下,比較不同濃度與厚度螢光粉對封裝效率的影響;此外也利用模擬改變封裝腔體的反射率,進一步分析螢光粉濃度、厚度與白光LED封裝效率之間的對應關係。

English Abstract

In this thesis, we studied on the power efficiency with different phosphor concentrations and thicknesses in white LEDs. Based on our silicate phosphor model, we used a blue light laser to excite phosphor plates with different concentrations and thicknesses and analysis the forward power, sideward power and backward power of each phosphor plate in the first time. We also did the experiment to verify our simulation and then used the measurement results to analysis the power efficiency in white LEDs later. Secondly, we changed the light source from a blue light laser to a blue LED and researched the power efficiency with different phosphor concentrations and thicknesses under the remote phosphor configuration. Besides, we also changed the surface reflectance in the simulation in order to figure out the reciprocal effects among phosphor concentration, phosphor thickness and power efficiency in white LEDs.

Topic Category 理學院 > 光電科學研究所
工程學 > 電機工程
Reference
  1. [1] M. R. Krames, O. B. Shchekin, R. Mueller-Mach, G. O. Mueller, L.Zhou, G. Harbers, and M. G. Craford, “Status and future of high-power light-emitting diodes for solid-state lighting,” IEEE J. Display Technol. 3, 160-175 (2007).
    連結:
  2. [2] R. D. Dupuis and M. R. Krames, “History, development, and applications of high-brightness visible light-emitting diodes,” IEEE J. Lightwave Technol. 26, 1154-1171 (2008).
    連結:
  3. [3] E. F. Schubert and J. K. Kim, “Solid-state light source getting smart,” Science 308, 1274-1278 (2005).
    連結:
  4. [5] N. Narendran, Y. Gu, J. P. Freyssinier-Nova, and Y. Zhu, “Extracting phosphor-scattered photons to improve white LED efficiency,” Phys. Stat. Sol. A 202, 60-62 (2005).
    連結:
  5. [6] A. Zukauskas, M. S. Shur, and R. Caska, Introduction to solid-state lighting (John Wiley & Sons, New York, 2002).
    連結:
  6. [8] R. Mueller-Mach, G. O. Mueller, M. R. Krames, and T. Trottier, “High-power phosphor-converter light-emitting diodes based on III-Nitrides,” IEEE J. Sel. Top. Quantum Electron 8, 339-345 (2002).
    連結:
  7. [14] K. Wang, X. B. Luo, Z. Y. Liu, B. Zhou, Z. Y. Gan, and S. Liu, “Optical analysis of an 80-W light-emitting-diode street lamp,” Opt. Eng. 47, 013002 (2008).
    連結:
  8. [15] J. K. Kim and E. F. Schubert, “Transcending the replacement paradigm of solid-state lighting,” Opt. Express 16, 21835-21842 (2008).
    連結:
  9. [18] A. Zauskas, F. Ivanauskas, R. Vaicekauskas, M. S. Shur, and R. Gaska, “Optimization of mulitichip white solid state lighting source with four or more LEDs,” Proc. SPIE 4445, 148-155 (2001).
    連結:
  10. [19] S. Muthu, F. J. P. Schuurmans, and M. D. Pashley, “Red, green, and blue LEDs for white light illumination,” IEEE J. Sel. Top. Quantum Electronics 8, 333-338 (2002).
    連結:
  11. [20] Y. Sato, N. Takahashi, and S. Sato, “Full-color fluorescent display devices using a near-UV light-emitting diode,” Jpn. J. Appl. Phys. 35, 838-839 (1996).
    連結:
  12. [22] P. Schlotter, R. Schmidt, and J. Schneider, “Luminescence conversion of blue light emitting diodes,” Appl. Phys. A 64, 417-418 (1997).
    連結:
  13. [25] C. C. Yang, C. M. Lin, Y. Chen, Y. T. Wu, S. R. Chuang, S. F. Huand, and R. S. Liua, “Highly stable three-band white light from an InGaN-based blue light emitting diode chip precoated with (oxy)nitride green/red phosphors,” Appl. Phys. Lett. 90, 123503 (2007).
    連結:
  14. [26] Y. H. Won, H. S. Jang, K. W. Cho, Y. S. Song, D. Y. Jeon, and H. K. Kwon, “Effect of phosphor geometry on the luminous efficiency of high-power white light-emitting diodes with excellent color rendering property,” Opt. Lett. 34, 1-3 (2009).
    連結:
  15. [28] R. Mirhosseini, M. F. Schubert, S. Chhajed, J. Cho, J. K. Kim, and E. F. Schubert “Improved color rendering and luminous efficacy in phosphor-converted white light-emitting diodes by use of dual-blue emitting active regions,” Opt. Express 17, 10806-10813 (2009).
    連結:
  16. [29] Y. Ohno, “Color rendering and luminous efficacy of white LED spectra,” Proc. SPIE 5530, 88-98 (2004).
    連結:
  17. [30] J. K. Sheu, C. H. Kuo, S. J. Chang, Y. K. Su, L. W. Wu, Y. C. Lin, J. M. Tsai, R. K. Wu, and G. C. Chi, “White-light emission from near UV InGaN-GaN LED chip precoated with blue/green/red phosphors,” IEEE Photon. Technol. Lett. 15, 18-20 (2003).
    連結:
  18. [31] R. J. Xiea, N. Hirosak, N. Kimura, K. Sakuma, and M. Mitomo, “2-phosphor-converted white light-emitting diodes using oxynitride/nitride phosphors,” Appl. Phys. Lett. 90, 191101-191103 (2007).
    連結:
  19. [32] N. Kimura, K. Sakuma, S. Hirafune, K. Asano, N. Hirosaki, and R. J. Xie, “Extrahigh color rendering white light-emitting diode lamps using oxynitride and nitride phosphors excited by blue light-emitting diode,” Appl. Phys. Lett. 90, 051109-051111 (2007).
    連結:
  20. [33] J. P. You, N. T. Tran, and F. G. Shi, “Light extraction enhanced white light-emitting diodes with multi-layered phosphor configuration,” Opt. Exp. 18, 5055-5060 (2010).
    連結:
  21. [34] H. Luo, J. K. Kim, E. F. Schubert, J. Cho, C. Sone, and Y. Park, “Analysis of high-power packages for phosphor-based white-light-emitting diodes,” Appl. Phys. Lett. 86, 243505 (2005).
    連結:
  22. [35] S. C. Allen and A. J. Steckl, “A nearly ideal phosphor-converted white light-emitting diode,” Appl. Phys. Lett. 92, 143309 (2008).
    連結:
  23. [36] B. F. Fan, H. Wu, Y. Zhao, Y. L. Xian, and G. Wang, “Study of phosphor thermal-isolated packaging technologies for high-power white light-emitting diodes,” IEEE Photon. Technol. Lett. 19, 1121-1123 (2007).
    連結:
  24. [37] Z. Y. Liu, S. Liu, K. Wang, and X. B. Luo, “Optical analysis of color distribution in white LEDs with various packaging methods,” IEEE Photon. Technol. Lett. 20, 2027-2029 (2008).
    連結:
  25. [38] J. K. Kim, H. Luo, E. F. Schubert, J. Cho, C. Sone, and Y. Park, “Strongly enhanced phosphor efficiency in GaInN white light-emitting diodes using remote phosphor configuration and diffuse reflector cup,” Jpn. J. Appl. Phys. 44, 649-651 (2005).
    連結:
  26. [39] R. C. Jordan, J. Bauer, and H. Oppermann, “Optimized heat transfer and homogeneous color converting for ultra high brightness LED package,” Proc. SPIE 6198, 61980-B 1-12 (2006).
    連結:
  27. [40] S. C. Allen and A. J. Steckl, “ELiXIR-solid-state luminaire with enhanced light extraction by internal reflection,” IEEE J. Display Technol. 3, 155-159 (2007).
    連結:
  28. [41] K. Yamada, Y. Imai, and K. Ishii, “Optical simulation of light source devices composed of blue LEDs and YAG phosphor,” J. Light & Vis. Env. 27, 70-74 (2003).
    連結:
  29. [42] 陳靜儀,矽酸鹽螢光粉用於白光LED之光學模型,國立中央大學光電所碩士論文,中華民國九十七年。
    連結:
  30. [43] N. T. Tran and F. G. Shi, “Studies of phosphor concentration and thickness for phosphor-based white light-emitting-diodes,” J. Lightwave Technol. 26, 3556-3559 (2008).
    連結:
  31. [46] C. C. Chen, C. Y. Chen, W. T. Chien, T. H. Yang, and C. C. Sun, “Optical performance as a function of phosphor particle number in white LED,” Proc. SPIE 7786, 778606 (2010).
    連結:
  32. [48] E. F. Schubert, Light Emitting Diodes (Cambridge University Press, New York, 2006).
    連結:
  33. [53] R. Tasker, R. N. Bhargava, J. Barone, V. Chhabra, V. Chabra, D. Dorman, A. Ekimov, S. Herko, and B. Kulkarni, “Quantum-confined atom-based nanophosphors for silid state lighting,” Proc. SPIE 5187, 133-141 (2003).
    連結:
  34. [54] R. Mueller-Mach, G. O. Mueller, and M. R. Krames, “Phosphor materials and combinations for illumination grade white pcLED,” Proc. SPIE 5187, 115-122 (2003).
    連結:
  35. [55] A. Borbely and S. G. Johnson, “Performance of phosphor-coated light emitting diode optics in ray-trace simulations,” Opt. Eng. 44, 111308 (2005).
    連結:
  36. [56] 何信穎,白光LED 之YAG 螢光粉光學模型之研究,國立中央大學光電所碩士論文,中華民國九十六年。
    連結:
  37. [58] C. C. Sun, C. Y. Chen, H. Y. He, C. C. Chen, W. T. Chien, T. X. Lee, and T. H. Yang, “Precise optical modeling for silicate-based white LEDs,” Opt. Express 16, 20060-20066 (2008).
    連結:
  38. [59] 紀葦世,高效能YAG螢光粉之特性量測與模型,元智大學光電所碩士論文,中華民國九十九年。
    連結:
  39. [61] N. T. Tran, J. P. You, and F. G. Shi, “Effect of phosphor particle size on luminous efficacy of phosphor-converted white LED,” J. Lightwave Technol. 27, 5145-5150 (2009).
    連結:
  40. [4] D. A. Steigerwald, J. C. Bhat, D. Collins, R. M. Fletcher, M. O. Holcomb, M. J. Ludowise, P. S. Martin, and S. L. Rudaz, “Illumination with solid state lighting technology,” IEEE J. Sel. Top. Quantum Electron 8, 310-320 (2002).
  41. [7] Y. Shimizu, K. Sakano, Y. Noguchi, and T. Moriguchi, “Light emitting device having a nitride compound semiconductor and a phosphor containing a garnet fluorescent material,” United States Patent, US 5998925 (1999).
  42. [9] JLEDs, http://www.led.or.jp/data/docs/JLEDS_Technical%20Report%20Vol2.pdf.
  43. [10] LEDinside, http://www.ledinside.com.tw/node/9288/.
  44. [11] LEDinside, http://www.ledinside.com.tw/node/11950/.
  45. [12] 孫慶成,螢光粉模型與LED 光色的控制,2010 LED 固態照明研討論文集,國立中央大學,中壢市,中華民國九十七年。
  46. [13] F. M. Steranka, J. C. Bhat, D. Collins, L. Cook, M. G. Craford, R. Fletcher, N. Gardner, P. Grillot, W. Goetz, M. Keuper, R. Khare, A. Kim, M. Krames, G. Harbers, M. Ludowise, P. S. Martin, M. Misra, G. Mueller, R. Mueller-Mach, S. Rudaz, Y. C. Shen, D. Steigerwald, S. Stockman, S. Subramanya, T. Trottier, and J. J. Wierer, “High power LEDs-technology status and market applications,” Phys. Stat. Sol. A 194, 380-388 (2002).
  47. [16] LEDinside, http://www.ledinside.com/node/10504/.
  48. [17] LEDinside, http://www.ledinside.com/node/9255/.
  49. [21] T. F. McNulty, B. Lake, D. D. Doxsee, S. Hills, and J. W. Rose, “UV reflectors and UV-based light source having reduced UV radiation leakage incorporating the same,” United States Patent, US 6686676 B2 (2004).
  50. [23] S. Nakamura and G. Fasol, The Blue Laser Diode: GaN based light emitters and lasers (Spinger, New York, 1997).
  51. [24] A. A. Setlur, A. M. Srivastava, H. A. Comanzo, and D. D. Doxsee, “Phosphor blends for generating white light from near-UV/blue light-emitting devices,” United States Patent, US 6685852 B2 (2004).
  52. [27] ENERGY STAR, http://www.energystar.gov/index.cfm?c=ssl_res.pt_ssl/.
  53. [44] Cree Inc., http://www.cree.com/products/pdf/XLampML_SH.pdf.
  54. [45] Cree Inc., http://www.cree.com/products/pdf/XLampXM_SolderingandHandling.pdf.
  55. [47] D. A. Neamen, Semiconductor Physics and Devices: Basic Principles (McGraw-Hill, New York, 2003).
  56. [49] 劉如熹、劉宇恒,發光二極體用氧氮螢光粉介紹,全華圖書股份有限公司,台北縣,中華民國九十五年。
  57. [50] 高逢時,黑夜的精靈─螢光體,科學發展期刊,第三百六十七期,64-69頁,中華民國九十二年。
  58. [51] 劉如熹、王健源,白光發光二極體製作技術-21世紀人類的新曙光,全華圖書股份有限公司,台北縣,中華民國九十四年。
  59. [52] 大田 登,色彩工程學:理論與應用,全華圖書股份有限公司,台北縣,中華民國九十六年。
  60. [57] 張容瑄,綠橘雙色矽酸鹽螢光粉光學模型之建立與分析,國立中央大學光電所碩士論文,中華民國九十九年。
  61. [60] Intematix Co., http://intematix.com/files/images/Catalog-2010.pdf.
Times Cited
  1. 彭逸寧(2012)。雙色分層螢光粉光學模型之建立與分析。中央大學光電科學研究所學位論文。2012。1-131。
  2. 古士恩(2016)。探討螢光膠對良率與生產力之影響。虎尾科技大學光電工程系光電與材料科技碩士在職專班學位論文。2016。1-72。