Title

熱昇華直噴在織品上之色彩品質特性研究

Translated Titles

The Study of Color Quality Characteristics on Textile Using Direct Dye Sublimation

Authors

蕭安迪(An-Ti Hsiao);周文明(Wen-Ming Chou)

Key Words

熱昇華直噴 ; 聚酯纖維 ; 色域 ; 染色堅牢度 ; Direct Dye Sublimation ; Polyester ; Color Gamut ; Color fastness

PublicationName

中華印刷科技年報

Volume or Term/Year and Month of Publication

2014(2014 / 04 / 01)

Page #

78 - 86

Content Language

繁體中文

Chinese Abstract

數位噴印科技的發展接近二十年,噴墨墨水、軟體和機器的進步發展更是突飛猛進,近年更發展出熱昇華直噴方式至織品上,其圖像之轉寫不需經由轉寫紙而採取對被印織物做直接的噴印,節省了中間轉印紙成本,並簡化了製程。本研究採用不同印刷解析度(600x600、600x900)及不同熱烘溫度(180℃、200℃、220℃)設定噴印於聚酯纖維(Polyester),透過儀器量測色彩品質特性,同時進行染色堅牢度(Color fastness)試驗。研究結果顯示熱烘溫度的提升使色域(Color Gamut)有較佳的表現。而較高的熱烘溫度配合高解析度時有明顯的階調擴增(Tone Value Increase)現象。染色堅牢度試驗方面耐水洗堅牢度可達4.5級,耐光堅牢度在Y色僅達2.5級、K色則可達4級。

English Abstract

Digital ink-jet printing was developed nearly two decades ago, and the improvement of ink, software and machinery is leaps and bounds. In recent years, there has been developing direct dye sublimation on textile and the reproduction is not required transfer paper but direct printing on textile. It also save cost and simplify production process. Therefore, this research is to investigate printing on polyester by differences of printing resolution (600x600, 600x900) and temperature steam (180°C, 200°C, 220°C). Through measuring the color quality characteristics by instrument, and testing color fatness. The study analysis we find: when temperature steam become higher, color gamut have better performance; higher temperature steam with higher printing resolution have obvious tone value increase phenomenon. In color fastness, color fastness to washing rating 4.5, color fastness to light only rating 2.5 in yellow and rating 4 in black.

Topic Category 工程學 > 工程學總論
社會科學 > 傳播學
Reference
  1. 陳昌郎、王怡力(2009)。數位印刷應用於水轉印之品質適性研究。中華印刷科技學會年報,2009,169-190。
    連結:
  2. Thurstone, L. L.(1927). A Law of Comparative Judgment. Psychological Review, (34), p273-286
  3. Brozovic, Maja,Pibernik, Jesenka,Banic, Dubravoko(2008).Quality of Lightness Reproductions.Journal of Imaging Science and Technology,52(6)
  4. Fairchild, M.D,Calabria, A.J.(2003).Perceived Image Contrast and Observer Preference I.: The Effects of Lightness, Chroma, and Sharpness Manipulations on Contrast Perception.Journal of Imaging Science and Technology,47(6),479-493.
  5. Namedanian, Mahziar,Gooran, Sasan(2011).Characterization of Total Dot Gain by Microscope Image Analysis.Journal of Imaging Science and Technology,55(4)
  6. Norberg, Ole(2009).Perceived Image Quality of Printed Images and Their Relation to Paper Properties.Society for Imaging Science and Technology
  7. Pedersen, Marius,Bonnier, Nicolas,Hardeberg, Jon Y.,Albregtsen, Fritz(2009).Attributes of a New Image Quality Model for Color Prints.Society for Imaging Science and Technology
  8. 李姿瑩(2013)。碩士論文(碩士論文)。中國文化大學資訊傳播學系。
  9. 周尊儒、洪國倫(2010)。泛論熱轉寫印刷製程與發展。印刷科技,26(1),43-45。
  10. 林峯標(2008)。博士論文(博士論文)。逢甲大學紡織工程研究所。
  11. 孫慶龍(2013)。台灣紡織業多元策略覓商機。產業雜誌,261,44-47。
  12. 葉文俊(2006)。碩士論文(碩士論文)。國立台灣藝術大學應用媒體藝術研究所。
  13. 廖哲鉦(2012)。碩士論文(碩士論文)。中國文化大學資訊傳播學系。
  14. 廖盛焜(2012)。數位印花。科技發展,470,30-35。
  15. 廖盛焜(1986)。博士論文(博士論文)。逢甲大學紡織工程研究所。
  16. 劉熾章(1982)。纖維理化。新學識文教出版中心。
  17. 蘇渙良(2012)。碩士論文(碩士論文)。逢甲大學纖維與複合材料學系研究所。