stands for Digital Object Identifier
and is the unique identifier for objects on the internet. It can be used to create persistent link and to cite articles.
Using DOI as a persistent link
To create a persistent link, add「http://dx.doi.org/」
before a DOI.
For instance, if the DOI of an article is 10.5297/ser.1201.002 , you can link persistently to the article by entering the following link in your browser: http://dx.doi.org/ 10.5297/ser.1201.002 。
The DOI link will always direct you to the most updated article page no matter how the publisher changes the document's position, avoiding errors when engaging in important research.
Cite a document with DOI
When citing references, you should also cite the DOI if the article has one. If your citation guideline does not include DOIs, you may cite the DOI link.
DOIs allow accurate citations, improve academic contents connections, and allow users to gain better experience across different platforms. Currently, there are more than 70 million DOIs registered for academic contents. If you want to understand more about DOI, please visit airiti DOI Registration （ doi.airiti.com ） 。
李孟杰 , Masters Advisor：吳浴沂
繁體中文 DOI： 10.6841/NTUT.2014.00092
- 6. Chunting Mi, Gordon R. Slemon, and Richard Bonert, “Modeling of Iron Losses of Permanent-Magnet Synchronous Motors,” IEEE Transactions On Industry Applications, Vol. 39, No. 3, May/June 2003.
- 7. Katsumi Yamazaki, Yu Fukushima, and Makoto Sato Dept, “Loss Analysis of Permanent Magnet Motors with Concentrated Windings-Variation of Magnet Eddy Current Loss Due to Stator and Rotor Shapes, ” Electronics and Computer Engineering Chiba Institute of Technology Narashino, Japan.
- 8. Katsumi Yamazaki, and Yoshiaki Seto, “Iron Loss Analysis of Interior Permanent-Magnet Synchronous Motors- Variation of Main Loss Factors Due to Driving Condition,” Ieee Transactions On Industry Applications, Vol. 42, No. 4, July/August 2006.
- 10. William R. Finley, and Mark M. Hodowanec, “Selection of Copper vs. Aluminum Rotors for Induction Motors,” Copyright material IEEE, Paper No. PCIC-2000-19.
- 11. Gareth Gilson, Dr. SJ Pickering, Dr. DB Hann, and Dr. C. Gerada, “Analysis of the End Winding Heat Transfer variation with Altitude in Electric Motors,” 2009 IEEE, 978-1-4244-4649-0/09/.
The cart has had several articles, so do you want to clear it, or add together to the cart?