透過您的圖書館登入
IP:3.138.174.174
  • 學位論文

無線射頻辨識(RFID)應用於混凝土試體電子化管理之研究

The Research of Radio Frequency Identification Application on Concrete Specimens Electronicize Management

指導教授 : 王隆昌

摘要


過去,國內管理混凝土試體皆仰賴人力識別、紙本書寫與粗糙的試體驗證之方式,因而衍生許多人為缺失、仿造驗證及管理漏洞等問題,導致廠商恣意偷工減料、掉包試體,澆置的混凝土品質逐漸低落,進而影響整體的工程品質。近年,確有相關單位著手試圖引用條碼系統等技術,輔助混凝土試體管理之作業,以取代傳統的管理與驗證之方式,惟面對條碼特性於試體管理之不便利,能發揮的空間確實有限,以致整體之成效未盡理想。類似前述科技在營建產業相關實務作業之應用是一較新之研究領域,因此本研究構想以資訊科技與營建管理之角度,試圖將RFID(Radio Frequency Identification)技術應用於混凝土試體管理之作業,促使每一混凝土試體皆具有身分識別,不僅能達到電子化管理之功能,更能有效防範試體掉包之虞。本研究主要針對RFID導入混凝土試體之可行性進行估評,並將RFID、PDA、DBMS與既有系統做一整合應用,建置一套混凝土試體電子化管理系統;研究成果期能供作工程主管機關在試體管理作業之參考,以強化混凝土試體管理之品質,有效改善管理漏洞、試體掉包之問題。

並列摘要


In the past, management of the concrete specimens is depended on identification of manpower, writing paper, and coarse specimen verification. Due to make a lot of contrived mistake, counterfeit verification, and leak of management. Causing manufacturer’s wanton scamp work, and substituting specimens. It is low gradually to water the concrete quality put, and influence the project quality. In recent years, relevant institutions quote the technology of bar code system to replace the traditional ways to manage and identify the process of concrete specimen. However, the performance was limited by the characteristics of bar code system. Similar application of the construction industry is more originality. This paper employ the RFID technology to improve the management of concrete specimens and expect to identify each management of to avoid substituting specimens effectively, meanwhile, to achieve the e-management. The purpose of this paper is accessing the possibility of introducing the RFID into the concrete specimens. We also integrate the RFID, PDA, DBMS with existed system to construct a electronic management system of the concrete specimens. We hope the experiment result can improve the existed problems and provide some new insights for director of project.

參考文獻


[58]鄭炳坤,RFID於物流中心應用之探討,碩士論文,中原大學,中壢,2005。
[30]行政院公共工程委員會,公共工程施工綱要規範,2003。
[50]馮翊庭,無線射頻辨識系統(RFID)接受模式之研究-從高科技製造業觀點,碩士論文,國立成功大學,臺南,2005。
[38]徐政雄,RFID的應用對供應鏈的影響-以汽車產業為例,碩士論文,國立成功大學,臺南,2005。
[1]Akinci B., Patton M.and Ergen E., "Utilizing Radio Frequency Identification on Precast Concrete Components: Supplier’s Perspective", Proceedings of 19st ISARC, USA, 2002.

被引用紀錄


葉日漢(2010)。應用無線射頻辨識技術建構營建工地人員門禁安全管理系統之研究〔碩士論文,國立交通大學〕。華藝線上圖書館。https://doi.org/10.6842/NCTU.2010.00540
羅南海(2011)。RFID技術於營建工地人員控管實務應用之研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2011.00275
林建銘(2009)。RFID於一次變電所設備點檢及人(手)孔蓋地下化之應用〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2009.00295
黃國峰(2009)。無線射頻辨識(RFID)置入於SRC構件之研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2009.00063
顏漢輝(2008)。RFID技術應用於混凝土試體管控作業流程之研究〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2008.00421

延伸閱讀