DOI
stands for Digital Object Identifier
(
D
igital
O
bject
I
dentifier
)
,
and is the unique identifier for objects on the internet. It can be used to create persistent link and to cite articles.
Using DOI as a persistent link
To create a persistent link, add「http://dx.doi.org/」
「
http://dx.doi.org/
」
before a DOI.
For instance, if the DOI of an article is
10.5297/ser.1201.002
, you can link persistently to the article by entering the following link in your browser:
http://dx.doi.org/
10.5297/ser.1201.002
。
The DOI link will always direct you to the most updated article page no matter how the publisher changes the document's position, avoiding errors when engaging in important research.
Cite a document with DOI
When citing references, you should also cite the DOI if the article has one. If your citation guideline does not include DOIs, you may cite the DOI link.
DOIs allow accurate citations, improve academic contents connections, and allow users to gain better experience across different platforms. Currently, there are more than 70 million DOIs registered for academic contents. If you want to understand more about DOI, please visit airiti DOI Registration ( doi.airiti.com ) 。
汪志勳 , Masters Advisor:陳夏宗;翁輝竹
繁體中文
氣體GCP控制技術 ; 受潮原料 ; 塑膠回收料 ; 銀紋 ; Gas counter pressure ; moisture pellets ; secondary material ; silver streaks


- 2. 林鈺婉,“超臨界微細發泡射出成型反壓機制建立並應用於流變特性研究,私立中原大學機械工程學系博士學位論文 (2009)
連結: - 3. 施銘奕,“氣體反壓對於含碳纖維高分子複材射出成型過程纖維排向度及導電度之影響研究”,私立中原大學機械工程學系博士學位論文 (2012)。
連結: - 6. 許評順,“模內氣體反壓與動態模溫機制應用於超臨界微細發泡射出成型發泡控制與表面品質影響之研究,私立中原大學機械工程學系博士學位論文 (2011)。
連結: - 7. 謝政璋,“應用氣體反壓技術改善金屬粉末射出成型充填流動特性與品質之研究,私立中原大學機械工程學系碩士學位論文 (2014)。
連結: - 12. 林明俊,外部氣體輔助射出成型對補強肋成品表面品質之研究,教專研2008。
連結: