本論文旨在設計太陽能與市電並聯監測控制系統,本系統以控制器搭配數位信號處理器(DSP),可操作在獨立與市電兩種供電模式。配合監控系統,可觀測太陽能電量之使用情形,適時的切換供電模式,使本系統具備不斷電系統之功能。 本論文之系統利用LabVIEW圖形程式設計一套監控太陽能及蓄電池電量之介面系統,並以數位信號處理器(DSP, TMS320F2812)為整體系統之核心,控制皆由程式來完成以減少硬體電路成本,並增加系統可靠度。 為測試系統之可行性,本論文實際製作一套小型太陽能市電並聯監測控制系統,測試、模擬當太陽能電力低於設定之電力,經由數位信號處理器切換供電模式,以證明本論文設計之系統可行性。
This paper aims to design monitoring and control system for solar energy grid-connected with power system, the system controller with a digital signal processor (DSP), can operate independently with power supply modes. With the monitoring system can be observed the use of solar power situation, a timely switch mode power supply, make the system functions of UPS. In this thesis, LabVIEW graphical programming interface used to design the interface system of monitoring solar and battery power. A digital signal processor (DSP, TMS320F2812), whose control rests with the program is completed in order to reduce hardware circuit cost while increase system reliability is the core of the whole system. In order to test the feasibility of the system, this thesis produce real-time monitoring and control for the small solar energy grid-connected with power system, simulating the situate; on that when the solar energy power is lower than the power system, set in advance. This thesis prove the feasibility of the system by switching the mode of power supply via digital signal processor.