- 期刊
USE OF PHASE CHANGE MATERIALS IN THE THERMOELECTRIC SYSTEMS OF BUILDING FACADES
摘要
In this study, experiments were conducted to maintain a comfortable indoor temperature, to reduce energy consumed by air conditioning, and to generate green electricity. It used a phase change material (PCM) and thermoelectric systems to construct facade models made of reinforced concrete (RC). It simulated solar heating, and measured temperature differences between specimens and output voltage during simulation. Experimental results were analyzed using robust regression. The maximum temperature difference between the two wall surfaces was 21%. The temperature of the heated PCM-altered wall was 19.3% lower than that of a conventional RC wall after 8 h. The highest output voltage was 200 mV. The findings of this study are expected to improve building energy use, and thus to contribute to environmental sustainability.
延伸閱讀
- 陳定睿、王英育、謝雅萍（2021）。The advantages of two-dimensional thermoelectric materials and its measurements methodology。真空科技，34(3)，8-16。https://www.airitilibrary.com/Article/Detail?DocID=1017091x-202109-202201030023-202201030023-8-16
- 王榮昌（2007）。The Investigation of Thermal Performance of Two-Phase Thermal Module〔博士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2007.00542
- 吳昇威（2010）。Numerical Sumulation of Phase Change Material in the Application of Increasing Indoor Thermal Comfort〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2010.00463
- Yam, C. W. (2003). Effect of internal thermal mass on building thermal performance [master's thesis, The University of Hong Kong]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0029-1812201200004180
- 方貴銀、徐錫斌（2002）。Study on Thermal Properties of Phase Change Thermal Energy Storage Materials for Cool Storage Air Conditioning。冷凍與空調，(18)，148-151。https://doi.org/10.7087/JRACT.200212.0148