- 期刊
- OpenAccess
Parametric Modeling and Moving Simulation of Vibrating Screen and Tubers on Potato Harvester
並列摘要
In order to overcome the behindhand and inefficient design of potato diggers, feature-based parametric modeling software Autodesk Inventor was used for modeling of potato diggers. The swing sieve, movement simulation with ADAMS was carried out. The complex velocity acceleration and displacement curves wereanalysed. Collision pressure curves were analysed too. Its velocity is less than or equal to 500mm/s and its acceleration is more than or equal to 2.5m/s^2 and less than or equal to 20m/s^2. Test results indicated that Collision pressures of small and medium tubers are 120 Newton and 250 Newton, respectively, which are all smaller than damaging pressure. Potato can be transferred freely and damage rate is less than or equal to 4% when the frequency is 5.5Hz and the swing is 30mm.
延伸閱讀
- Wang, H. B., Sun, C. H., Li, Z. R., & Zhang, Y. P. (2015). Finite Element Analysis and Experiment on a Piezoelectric Harvester with Multiple Cantilevers. International Journal of Energy and Power, 4(), 20-26. https://doi.org/10.14355/ijep.2015.04.003
- 蔣宗勳（2022）。Modeling and Simulation of the Railway Vehicle Traction System〔碩士論文，國立屏東科技大學〕。華藝線上圖書館。https://doi.org/10.6346/NPUST202200194
- 謝志誠（1994）。Discrete modeling and design of position control system for implement mounted on tractor。農業機械學刊，3(1)，1-13。https://www.airitilibrary.com/Article/Detail?DocID=10190430-199403-3-1-1-13-a
- 謝志誠（1994）。Discrete Modeling and Design of Position Control System for Implement Mounted on Tractor。農業機械學刊，3(1)，1-14。https://doi.org/10.30062/JAM.199403.0001
- 陳柏延（2013）。Parametric Design and Numerical Simulation of S-type Energy Saving Rudder〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2013.00861