封包編號為基礎的數據監控系統

現代化的工業控制設備通常都以工業網路連結為基礎，本論文我們發展一個工業網路的數據監控系統，能紀錄設備送出及接收之數據內容，在設備正常動作的這些數據將被存起來當作參考值。當設備連續運作過程中，本系統將會持續監控該數據值，如果該數據值出現異常，系統就會發出警示，提醒使用者應該對設備進行保養或維護，避免設備的故障或損失繼續擴大。本系統包括兩個部分，一個數據封包的紀錄與分析模式，一個是數據的線上監控與警示器，其中紀錄與分析器可以用來輔助設計工業網路系統及進行工業網路的錯誤排除，線上監控與警示器則可以用於設備的智慧型保養與維護。

關鍵字

工業網路；監控系統

並列摘要

Modern methods of industrial equipment control are most often based on connections with industrial network. In this thesis we have developed a data-monitoring system that is connected to industrial network. This system tracks the data emitted and accepted by the monitored equipment, and stores them as reference value. As the equipment works this system continues to monitor the data, and warns the operator if the data do not conform to regular patterns. This can remind the operator to fix or maintain the equipment before it fails completely. There are two components in this system, a data tracking and analyzing mode, and a data monitoring and warning device. The first can help design industrial network systems and eliminate network malfunctions, while the latter can be applied in maintenance of industrial equipment.

並列關鍵字

Industrial network ； Monitoring system

參考文獻

[10]王俊仁，「具無線網路傳輸功能之振動監視與紀錄系統」，碩士論文，國立虎尾科技大學飛機工程系航空電子研究所，2013。

[1]I. El-Thalji , E. Jantunen ,“On the Development of Condition Based Maintenance Strategy for Offshore Wind Farm Requirement Elicitation”, ScienceDirect, Vol.24, Jan, 2012, pp. 328-339.

[5]Peter Gaboury , Angeline Ottolini , Bruno Spanu ,“Eradicating human errors during preventive maintenance understanding the psychological reasons we make errors and implementing proactive practices to manage and reduce human errors”, ASMC, 24th Annual SEMI, 2013

[7]Hana Opocenska , Milos Hammer , “Use of technical diagnostics in predictive maintenance”, ME, 17th International Conference on,2016

[8]F. Salvadori , M. de Campos , R. de Figueiredo ,“Monitoring and Diagnosis in Industrial Systems Using Wireless Sensor Networks”, WISP, Oct,2007

國際替代計量

封包編號為基礎的數據監控系統

未授權

主題瀏覽