- 學位論文
工業設計師之電腦輔助Pro/ENGINEER®技能認證題庫設計與驗證之研究
A Study of Industrial Engineer Computer Aided Pro/ENGINEER® Skills Certification Questions Database Design and Verification
摘要
台灣資訊產業界對於工業設計師，在電腦3D輔助設計的專業能力需求，一直有著明顯差距。本研究主要以中華民國電腦基金會之Pro/ENGINEER®技能認證實用級題庫為研究主題，著手進行瞭解資訊產業界的實際需求。研究過程發現現有題庫的受測方向與產業界能力需求有差異，產業界對工業設計師建構特徵的能力需求，有實體特徵應用、組立件應用、零件修護應用、工程圖應用、曲面設計應用，但現有受測題庫之題型不足，並不合適於工業設計師的能力認證。所以本研究以資訊產業界需求，針對新進工業設計師建立一套合適業界認證Pro/ENGINEER®能力的題庫系統，作為新進工業設計師在電腦輔助工業設計(CAID)階段，驗證出其Pro/ENGINEER®軟體設計的技術能力，俾使工業設計師能快速的投入職場，以利有效的利用Pro/ENGINEER®做產品3D模型建構。 所以依產業之需求為基礎下，重新設計新改善題庫，再以工作經驗未滿三年的新進工業設計師實際受測驗證，證明新題庫較合適於新進工業設計師的認證，同時工作年資經驗與受測的合格機率成正比。 期待本研究能對新進工業設計師在Pro/ENGINEER®認證系統的設計上有所幫助。讓工業設計師具備電腦3D輔助設計模型建構技巧，拉近教育界與產業間的距離，提升工業設計師的能力，強化台灣工業設計水準，進而讓台灣產品擠進國際市場。
並列摘要
Taiwan’s Information Technology [IT] industry, in terms of the demands for the software and skills for 3D assisted designing, has constantly been at a deficit. This report targets the Pro/ENGINEER® Skills Certification’s Practical Grade Questions Database as the main subject of study, making an effort to understanding the realistic needs of the IT Industry. Research shows that the subject areas of the questions in the database differ from what the industry needs. The traits that an industrial designer exhibit that the industry is looking for include solid feature application, assembly part application, trim part application, drawing application, and surface design application. However, the Questions database lacks the variety suitable for certifying a designer’s skills & abilities. This study is therefore here to provide a new questions database system suitable to test the new generation of designers’ proficiency with Pro/ENGINEER®, based on the requirements of the industry. This new system is therefore designed to test the young designers on their Pro/ENGINEER® designing skill at the CAID stage, and allow them to enter the work force sooner, and effectively apply Pro/ENGINEER® for Product 3D modeling framework. And so with the needs of the industry as the fundamental criteria, the questions database is redesigned and improved, after which have the designers with less than three years working experience take the certification under the new database. The final conclusion is that the new database is more suitable as a certifications program for testing new designers, with the qualifying rate directly proportional to work experience. This study is helpful to the skills of new designers under the Pro/ENGINEER® certification in using the software to produce 3D designs, and closing the gap between the educational and business fields, upgrade the capabilities of our industrial designers, strengthen Taiwan’s designing standard of quality, and put Taiwan’s products on the international Market.