並列摘要
The purpose of this paper is to investigate the properties attainable by impregnation with dispersions of polymers. 10 polymers belonging to four categories are used in this study, they are acrylic resin, EVA resin, petroleum resin and PU resin respectively. The contributions of various saturants to the physical properties of paper such as dry and wet tensiles, tearing resistance, folding endurance, opacity, air permeability and sizing were compared. The results of this study strongly indicate that the categories of polymers play a dominate role in determining physical properties of impregnate-papers. It can be seen that the acrylic resins show the highest tensile and folding improvement and the least tearing retention. Petroleum resin shows the most pronounced effect on the opacity and the sizing of impregnated-papers. EVA resins reduce air permeability at high resin pickups.
延伸閱讀
- 蘇哲盟（2011）。樹枝狀水性PU壓克力樹脂之合成與紫外光硬化動力學探討〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-1807201120113800
- 胡銘珊、宋憶青、李文昭（2014）。含液化木質素水性PU樹脂之膠合及塗裝性能。林業研究季刊，36(3)，217-225。https://www.airitilibrary.com/Article/Detail?DocID=16068351-201409-201409220004-201409220004-217-225
- 劉佩青（2010）。感光性樹脂在高透明聚亞醯胺基材上之接著強度及其性質研究〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2010.00306
- Suprapto (2020). Fabrication and Characterization of Polymer Film [doctoral dissertation, Chung Yuan Christian University]. Airiti Library. https://doi.org/10.6840/cycu202000903
- 薛敬和、楊進盛（1995）。Polymer-Metal Complex。化學，53(2)，203-213。https://doi.org/10.6623/chem.1995019