- 期刊
影響溶油成膜型防蝕劑防蝕效果之環境因素探討
Effect of Environmental Factors on the Efficiency of Oil-Soluble, Film-Forming Corrosion Inhibitors
摘要
本研究主要利用重量損失法及交流阻抗技術來探討溫度、流速、氯離子濃度和油水比等環境因素對溶油成膜型防蝕劑之防蝕效果的影響，結果顯示溫度、流速和低油水比對防蝕劑劣化的影響程度大於氯離子的作用，溶液中油的存在會促進防蝕劑的防蝕效果，油在其劣化過程扮演雙重角色，最後並對防蝕劑的劣化行爲加以討論。
關鍵字
無資料並列摘要
The effects of environmental factors, such as temperature, flow rate, chloride ion and oil/brine ratio, on the efficiency of oil-soluble, film-forming corrosion inhibitors were investigated by the measurements of weight loss and polarization resistance. The results show that the temperature, flow rate and oil/brine ratio are the main factors affecting the efficiency of corrosion inhibitors. The oil phase can enhance the inhibition efficiency and play a dual role on the decay of inhibitor film. Finally, the decay process of inhibitor film on the metal surface is discussed.
並列關鍵字
無資料延伸閱讀
- 李文舜（2002）。室內環境中溫度及空氣交換率對油性及水性塗料中揮發性有機物排放之影響〔碩士論文，元智大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0009-0112200611344114
- 林以莉（2012）。室溫硬化型電活性環氧樹脂之仿生疏水防蝕塗料與可逆摻雜及改質石墨烯聚胺基甲酸酯發泡體之製備及其性質探討〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu201200499
- 陳毓涵（2021）。界面活性劑對薄膜液體貫穿壓力與薄膜蒸餾影響之實驗探討〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu202100471
- Wang, Z., Gao, Z., & Sun, G. (2023). Analysis of the Optimum Conditions for Oil Pollution Degradation by Oil Bacteria Using Response Surface Methodology. International Core Journal of Engineering, 9(4), 319-328. https://doi.org/10.6919/ICJE.202304_9(4).0046
- 蔡博年（2007）。Characteristics, Coagulation and Filtration of Soluble Microbial Products and Extracellular Polymeric Substances〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2007.00873