A Vision-Measuring Method for an Imperfect Circle

影像量測瘕疵圓之方法

李廣齊(Kuang-Chyi Lee) ； 林見昌(Chien-Chang Lin)

《工業工程學刊》 22卷1期 (2005/01) Pp. 38-45

https://doi.org/10.29977/JCIIE.200501.0005

摘要

在半導體元件的製程中，印刷電路板(PCB)的圓孔定位以及光學點所提供焊接時座標的參考依據，常因檢測時應打光的方式有所不同或是半導體元件的金屬表面反光，而造成CCD攝影機在取像時圓孔變形、產生雜訊或是光線不足導致影像模糊，其使得在求取定位圓心的座標時產生誤差。本文提出一四點量測圓心的眾數法，以克服上述瘕疵圓影像量測的問題。由模擬與實際測試的結果知此方法可行，其並且可以準確量測到被遮蔽六十度以上圓之圓心座標。本文亦將四點量測圓心之眾數法和面積法、三點法、輪廓追蹤法與最小方差法等影像量測圓心的方法比對，四點量測圓心之眾數法實為較快速且又準確的圓心量測方法。

關鍵字

眾數法 ； 圓心定位 ； 瘕疵圓 ； 影像量測

並列摘要

The positioning center of the circular hole of PCB and the reference coordinates of welding by optical point in the manufacture process of the semiconductor components will cause the circle deformed and will create image noise or blurred image when the image from CCD camera is grabbed by the different lighting method or light source. When the surface of objects inspected reflect the light, it will cause the error of center positioning. This paper proposes a 4-points mode number method for the center positioning to overcome the problem of the measurement of the imperfect circle. The results of simulation and experiments indicate that this method is feasible and it can measure accurately the coordinates of the center of the circle which is covered by the other objects or is deformed over sixty degrees. Based on experiments, it is known that the 4-points mode method is faster and more accurate than the area, 3-points, contour-tracking and least-squares error methods of center-positioning.

並列關鍵字

mode method ； center positioning ； imperfect circle ； vision measurement

參考文獻

Lee, K. C.,H. P Huang,S. S. Lu(1992).A flexible robot inspection cell based on vision image.International Journal of Computer Integrated Manufacturing.5(5),310-318.

Lee, K. C.,H. P. Huang,S. S. Lu(1993).Burr detection by using vision image.International Journal of Advanced Manufacturing Technology.8,275-284.

Pei, S. C.,J. H. Horng(1995).Circular arc detection based on Hough transform.Pattern Recognition Letters.16,615-625.

Luo, D.,P. Smart,J. E. S. Macleod(1995).Circular Hough transform for roughness measurement of objects.Pattern Recognition.28(11),1745-1749.

Guil, N.,E. L. Zapata(1997).Lower order circle and ellipse Hough transform.Pattern Recognition.30(10),1729-1744.