TOWARDS REACH: CRUCIAL CONTROL PROCESSES REQUIRED BY A WEAVING AND DYEING FACTORY

In Taiwan, the weaving and dyeing factory plays an important role on textile industry. Its finished dyeing fabric makes a main source of foreign exchange. Exploring a control process of weaving and dyeing factory to react to Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) therefore becomes essential. In this paper, a backcasting method is applied to assist the control process framework development. The proposed framework consists of three modules of the green supplier management, green product management, and the REACH regulation information passing management, which are presented in six control processes. A unified modeling language (UML) model is shown to elaborate on these processes and their correlations in detail. Finally, the control processes for empirical interviews are summarized to provide improvement points and research direction in the future.

關鍵字

weaving and dyeing factory ； Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) ； control process framework ； unified modeling language (UML)

並列摘要

對臺灣紡織產業而言，織染廠扮演重要的角色。再者，織染廠的染整成品布是重要的出口商品，因此，探討織染廠如何做控制程序，以遵守歐盟制定之註冊、評估、授權與限制的法規，已成為重要的研究議題。本研究採用向後預測法去幫助織染廠發展一套控制程序架構，其所發展之架構包括三個模組：綠色供應商管理模組、綠色產品管理模組、《化學品註冊、評估、授權及限制法規》（Registration, Evaluation, Authorization, and Restriction of Chemicals, REACH）和資訊傳遞管理模組，共有六個控制程序。此外，本研究利用統一塑模語言去呈現三個模組和六個控制程序的關聯性。最後，本研究採實證研究法去訪談數個織染廠，並歸納其特色做法，以提供其他工廠做改善參考和提供學者未來研究之方向。

並列關鍵字

織染廠；《化學品註冊、評估、授權及限制法規》；控制程序架構；統一塑模語言

參考文獻

Angerer, G., Nordbeek, R. and Sartorius, C., 2008, Impacts on industry of Europe’s emerging chemicals policy REACH, Journal of Environmental Management, 86(4), 636-647. doi:10.1016/j.jenvman.2006.12.020

Assmuth, T., Hildén, M. and Craye, M., 2010, Beyond REACH: roadblocks and shortcuts en route to integrated risk assessment and management of chemicals, Science of the Total Environment, 408(18), 3954-3963. doi:10.1016/j.scitotenv.2010.02.010

Baumeister, J., Striffler, A., Brandt, M. and Neumann, M., 2016, Collaborative decision support and documentation in chemical safety with KnowSEC, Journal of Cheminformatics, 8, 21. doi:10.1186/s13321-016-0132-8

Blainey, M., de Avila, C. and van der Zandt, P., 2010, Review of REACH Annex IV—establishing the minimum risk of a substance based on its intrinsic properties, Regulatory Toxicology and Pharmacology, 56(1), 111-120. doi:10.1016/j.yrtph.2009.09.016

Byggeth, S., Broman, G. and Robèrt, K.-H., 2007, A method for sustainable product development based on a modular system of guiding questions, Journal of Cleaner Production, 15(1), 1-11. doi:10.1016/j.jclepro.2006.02.007

國際替代計量

TOWARDS REACH: CRUCIAL CONTROL PROCESSES REQUIRED BY A WEAVING AND DYEING FACTORY

全文下載

主題瀏覽