以多層塗佈方法製作3D景深圖像II型布膜材料之研究

A Study of Using Multilayer Coated Printing to Create 3D image depth ofType II Membrane Material

蔡穎薇(Ying-Wei Cai) ； 邢文灝(Wen-Hao Hsing)

《華岡紡織期刊》 22卷2期 (2015/07) Pp. 86-95

摘要

本實驗目的在於探討玻璃纖維基布經由PVC多層塗佈，賦予圖案之PVC樹脂交錯塗佈和噴印，改變塗布刀狹縫高度，使其達到多層次效果。並且經由聚四氟乙烯樹脂噴塗，研究分析布膜之自潔性、防潑水性之外觀結構與界面角分析，使其達到最佳疏水自潔性能。由實驗結果得知加工時以PTFE溶液對玻璃維梭織布以70g/min噴塗，再旋轉180°再進行第二段噴塗及壓吸加工與熱處理，具較佳疏水自潔性能；第一層至第四層塗布刀狹縫高度分別設定為50μm、100μm、150μm、100μm有最佳的表面形態與厚度；立體度的分析可得知，隨著樹脂層的增加背景色逐漸模糊，而花朵漸層則逐漸銳利，確立本實驗確實有達到視覺景深之效果。

關鍵字

布膜 ； PVC ； 四氟乙烯 ； 自潔性 ； 玻璃纖維

並列摘要

The purpose of this experiment is to explore via glass fiber fabric PTFE resin coating, self-cleaning cloth membrane research and analysis, the water repellent properties of the appearance of the structure and interface angle analysis, to achieve the best hydrophobic self-cleaning properties, given the pattern of PVC resin coating and printing staggered to achieve the effect of visual depth of field. When informed by the results of the processing solution with PTFE -dimensional woven glass cloth to 70g / min spray, then rotated 180 ° and then the second paragraph of the spray pressure suction processing and heat treatment , with better hydrophobic self-cleaning properties ; the first layer the fourth layer coating knife to slit height are set to 50μm, 100μm, 150μm, 100μm have the best surface morphology and thickness ; analysis of three-dimensional degree can be learned , the background color of the resin layer increases gradually blurred, and the flowers fade sharp layer gradually establish this experiment does have to achieve the effect of visual depth of field.

並列關鍵字

fabric membrane ； PVC ； PTFE ； self-cleaning ； glass fiber