- 期刊
Effect of Wire Electrical Discharge Turning Parameters on Surface Roughness of Titanium Alloy
摘要
In this study, surface roughness of material Ti-6Al-4V that is the micro-cylindrical workpieces is analyze involving the wire electrical discharge turning (WEDT). The effects of pulse intensity, voltage, wire tension, and rotational spindle speed are investigate and optimize using the response surface methodology (RSM). Based on the results, the surface of the machined workpieces deteriorates according to the violent energy density generate by a high pulse intensity and voltage along with a low electrode wire tension and spindle speed. The optimal surface roughness obtains experimentally through the desirability approach is 4.0143 μm with a relative error at 5.9% compared to prediction.
延伸閱讀
- 張盈真（2016）。Analyses of Material Characteristics for Ag-4Pd Alloy Wire after Ultrasonic Wire Bonding〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU201600477
- 張文齡（2011）。Effect of Furnace Atmosphere on The Growth of Titanium Dioxide Nanowires〔碩士論文，國立虎尾科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0028-3006201121491000
- 白清源（2006）。Studies of electrical discharge surface alloyed superalloy Haynes 230 and its high temperature oxidation behaviors〔博士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2006.00388
- MEHMOOD, S., PASHA, R. A., & SULTAN, A. (2017). Effect of Electric Discharge Machining on Material Removal Rate and White Layer Composition. Mehran University Research Journal of Engineering and Technology, 36(1), 45-54. https://www.airitilibrary.com/Article/Detail?DocID=P20170126001-201701-201701260036-201701260036-45-54
- 王淳聖（2014）。Study of the Effects in Electical Discharge Machining by Gel Dielectric with Titanium Powder〔碩士論文，健行科技大學〕。華藝線上圖書館。https://doi.org/10.6824/UCH.2014.00013