供應鏈協同作業模式應用與個案研究

A Guideline and Case Study for Supply Chain Collaborative Operation Model

呂執中(Jr-Jung Lyu) ； 陳平舜(Ping-Shun Chen) ； 傅翰祺(Han-Chi Fu) ； 林宜靜(Yi-Ching Lin)

《電子商務學報》 10卷4期 (2008/12) Pp. 941-962

https://doi.org/10.6188/JEB.2008.10(4).10

摘要

供應鏈管理隨著資訊透明化以及國際市場的興起而被業界逐漸重視，而其中協同供應鏈管理為近年被廣泛討論的議題。然而在企業實際導入以及運用上，受限於問題的切入角度、探討重點以及導入專案深度的不同，造成在實際應用與推動上產生不少差異。對於管理供應鏈的決策者而言，隨著影響問題的範疇從組織階層擴大到全球運籌管理，其解決問題的方式也越顯棘手。本研究針對目前產業常見之問題，建構出一套一般性之供應鏈協同參考指引，以供應鏈參考模式(Supply Chain Operations Referencemodel, SCOR model)的架構為基礎，利用SCOR Levels 1到3為標準，讓企業繪出供應鏈流程，並結合限制理論(Theory of Constraints, TOC)流程思考的工具運用，找出供應鏈管理真正問題癥結，再輔以資訊系統(Information Technology, IT)來協助改善企業體質，提供業界推動供應鏈協同作業模式之系統化步驟。最後，並以一案例說明模式之可行性。

關鍵字

供應鏈參考模式SCOR ； 限制理論TOC ； 供應鏈協同

並列摘要

Facing the raising international competitiveness, collaborative supply chain management becomes an emerging issue that is widely discussed. Due to variation in different project characteristics and various alternatives that can be adopted, the differences between the practical application and project goal are significant. Furthermore, when it comes to the global logistics management, the decision issues are so complicated that are very difficult to deal with. This research proposes a collaborative supply chain guideline focusing on general industrial problems. The guideline is based on supply chain operations reference (SCOR) model, addressed by supply chain council (SCC), and combines with TOC Logistic-Tree to identify core problems in companies. Information technology (IT) is applied to integrate the proposed guideline to assist the implementation process. Finally, a case study is presented to demonstrate the feasibility of proposed guideline.

並列關鍵字

Supply Chain Operations Reference Model ； TOC Logistic-Tree ； Supply Chain Collaboration

參考文獻

Bolstorff, P.,Rosenbaum, R.(2003).Supply chain excellence.New York:Amacon.

Byrne, P. J.,Heavey, C.(2006).The impact of information sharing and forecasting in capacitated industrial supply chains: A case study.International Journal of Production Economics.103(1),420-437.

Christopher, M.(1998).Logistics and Supply Chain Management: Strategy for Reducing Cost and Improving Service.London:Financial Times-Pitman.

Disney, S. M.,Towill, D. R.(2006).A methodology for benchmarking replenishment-induced bullwhip.Supply Chain Management-an International Journal.11(2),160-168.

Davenport, T. H.,Short, J. E.(1990).The new industrial engineering: information technology and business process redesign.Sloan Management Review.31(4),11-27.