- 期刊
Experimental Research on Ultra Thin Friction Course Interlayer Bonding Strength
並列摘要
An ultra thin friction course (UTFC) is a good performance preventive maintenance technology. Its many properties that improve performance include improved skid resistance, quieter driving ride, harder wearing surface, and effective waterproofing. The study reported in this paper investigates the relationships between the interlayer shear strength and the interlayer bonder properties, amounts of sprayed emulsion bonding agent, and aggregate gradation of the UTFC-10 bituminous mixture through direct shear testing using an interlayer shearing device. The results indicate that the styrene-butadiene-styrene tri-block polymer (SBS)-modified asphalt emulsion studied is a desirable interlayer binder for use with UTFC treatment. The desirable SBS content of the emulsion should be more than 2.5% by weight, the amount of sprayed emu1sion should be about 0.8 to 1.2L per square meter, and the percent air voids in UTFC bituminous mixture should be limited to 8 to 10%.
延伸閱讀
- 李宗龍（2012）。A Study on Testing Interface Strength of CFRP sheets and the Confining Effect with a Lap Splice〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2012.00441
- Huang, Z. Y. (2010). Magnetization Reversal of the Patterned Iron Ultra-thin Film [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2010.10251
- Chen, P. Y. (2020). Experimental Investigation of Whole-field Thin Film Stress [doctoral dissertation, National Tsing Hua University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0016-2502202114261480
- 仇明侠、叶志祥、项炳锡、王萌、吴丹、王宁（2021）。Research on Innovation Experiment and Practice Teaching Reform of ＂Semiconductor Physics and Devices＂。社会科学理论与实践，3(4)，52-59。https://doi.org/10.6914/tpss.030405
- Chen, C. R., Lo, K. T., Chen, C. Y., & Wu, H. W. (2010). Disintegrating Force Measurement by Texture Analysis. 嘉南學報（科技類）, (36), 7-14. https://doi.org/10.29540/CNABST.201012.0002