- 期刊
- OpenAccess
Optimizing Material Removal Rate (MRR) in WEDMing Titanium Alloy (Ti6Al4V) Using the Taguchi Method
並列摘要
Selection of optimal cutting parameters has always been a critical issue to achieve high-quality in the machining process. In this study Design of Experiment (DOE) method for selection of optimal cutting parameters during WEDM of titanium alloy (Ti6Al4V) is experimentally studied. Moreover, the behaviour of three control parameters such as Pulse ON Time (A), Pulse OFF Time (B) and Peak Current (C) on machining performance, including Material Removal Rate (MRR) and Surface Roughness (SR) is studied using Analysis of Variance (ANOVA). This study has been establishedasa second-order mathematical model based on the Response Surface Methodology (RSM). The experimental plan was based on the face cantered, Central Composite Design (CCD). The residual analysis and confirmation runs indicate that the proposed models could adequately describe the performance of the factors that are being investigated. The results are particularly useful for scientists and engineers to determine which subset of the process variable has the greatest influence on the process performance.
延伸閱讀
- 余豐榮、李義剛、鄭哲綸、邱稚淳（2013）。Determining Compression Parameters for Grain Refinement of Aluminum Alloys Using the Taguchi Method。科學與工程技術期刊，9(2)，77-85。https://www.airitilibrary.com/Article/Detail?DocID=18166563-201309-201309270011-201309270011-77-85
- 李瑞賢（2016）。The Study of Mechanical Properties after Thermal Cycling in 7050 T6 Aluminum Alloy〔碩士論文，國立虎尾科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0028-0208201622365700
- 王錫九、蔡佑政、鍾啟睿、陳適範、薄慧雲、魏肇男、廖健鴻（2020）。Effect of Aluminum/Titanium/Zirconium Addition on Microstructure of MAR-M247 Nickel-based Superalloy。鑛冶：中國鑛冶工程學會會刊，64(3)，74-81。https://doi.org/10.30069/MM.202009_64(3).07
- 黃道成（2009）。Research on Mechanical Properties for Ti-6Al-4V sheet metal by Heat Treatment After Laser Welding〔碩士論文，國立臺灣師範大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0021-1610201315172325
- Díaz, F. V., Rosso, F. N., Walker, A. C., Mammana, C. A., & Guidobono, A. P. M. (2015). Analysis of Residual Deformations and Stresses in a Rolled Sheet of AA 6082-T6 Aluminium Alloy Using a Micro-indent Method. Research Journal of Applied Sciences, Engineering and Technology, 11(3), 245-251. https://www.airitilibrary.com/Article/Detail?DocID=20407467-201509-201512090024-201512090024-245-251