雙向流環路儲槽之設計與性能測試

Design and Performance Test of a Two-Phase Flow Reservoir.

陳品志(Ping-Chih Chen)

《東方學報》 33期 (2012/12) Pp. 55-70

https://doi.org/10.29421/JTDU.201212_(33).0004

摘要

本毛細泵吸環路簡稱CPL是一種具有雙相流特性高效率熱傳性的熱控制環路，本研究主要目的為設計一組雙相儲槽控制整體環路溫度，並且討論對環路影響，實驗結果顯示儲槽影響為：（1）環路啟動時間；（2）環路操作溫度；（3）蒸發器壁溫；（4）環路失效現象。

關鍵字

毛細泵吸環路 ； 儲槽 ； 雙相流 ； 環路失效

並列摘要

The Capillary Pumped Loop (CPL) is the most efficient thermal control loop that it has been developed by using the characteristics of two-phase flow. The purpose of this study is to design a two-phase reservoir for control the loop temperature and to discuss its effect of the loop. Experimental results indicate the performance of the reservoir affects the start-up time, the operation temperature, the wall temperature, the deprime phenomenon of the loop.

並列關鍵字

Capillary Pumped Loop(CPL) ； reservoir ； two-phase flow ； deprime

參考文獻

Divkey, J.T., Peterson G.P. “Experimental and Analytical Investigation of a Capillary Pumped Loop” Journal of Thermophysics and Heat Transfer,Vol.8, No. 3,July-Sept.1994.

Kroliczek, E.J. et al., “Design, Development and Test of a Capillary Pumped Loop Heat Pipe ”, AIAA Paper No.84-1720,1984.

Todreas, N.E. and Kazimi, M.S. “Nuclear System ⅠThermal Hydraulic Fundamentals”, Hemisphere Publishing Corporation, pp.257-265,1990.

Ku, J. and Yun, S., “A Prototype Heat Pipe Heat Exchanger for the Capillary Pumped Loop Flight Experiment”, Proceedings of the AIAA 27th Thermophysics Conference, Washington, DC, AIAA Paper 92-2910,1992.