The Best Surface Fitting of Regional Geoidal Undulation-A Case Study of Taichung Area

區域性大地起伏最佳曲面擬合之研究－以台中地區為例

甯方璽(Fang-Shii Ning) ； 李文傑(Wen-Chieh Lee)

《國土測繪與空間資訊》 3卷2期 (2015/07) Pp. 87-98

摘要

幾何法大地起伏可以由正高及全球導航定位系統的橢球高快速獲得，且其精度較重力法所得到之大地起伏高，因此本研究於不同的曲面模型中尋求最佳的大地起伏擬合曲面，利用此曲面能夠精確的內插出各未知點之大地起伏值，由研究結果顯示在經費及精度上考量以二次曲面為最佳。

關鍵字

大地起伏 ； 正高 ； 擬合曲面

並列摘要

The geoidal undulation of points can be derived from orthometric height and GNSS geodetic height. The geometric method can produce geoidal undulation more accurate and faster than gravimetric method in the area with GNSS data and levelling data. In this research, we use different surface models to find out the best fitting surface based on geometric method to interpolate geoidal undulation of unknown point. The result shows quadratic surface method is the best one to solve regional geoidal undulation in terms of both costs and benefits.

並列關鍵字

Fitting Surface ； Geoidal Undulation ； Orthometric Height

參考文獻

Hastie, T., R. Tibshirani, and J. Friedman, 2009, The elements of statistical learning, 2nd edition, New York: springer.

Awange, J. L., E. W. Grafarend, B. Paláncz, and P. Zaletnyik, 2010, Algebraic Geodesy and Geoinformatics, 2nd edition, Berlin Heidelberg : Springer-Verlag.

Kearns, M., and D. Ron, 1999, Algorithmic Stability and Sanity-Check Bounds for Leave-One-Out Cross-Validation, Neural Computation, 11(6), 1427-1453.

Lancaster, P., and K., Salkauskas, 1986, Curve and Surface Fitting: An Introduction, 1st edition, London: Academic Press.

Pottmann, H., and S., Leopoldseder, 2003, A concept for parametric surface fitting which avoids the parametrization problem, Computer Aided Geometric Design, 20(6), pp.343-362.