- 期刊
- OpenAccess
Vibration Analysis of a Novel Stator Wheel Structure for a Direct-Drive PM Generator
並列摘要
A novel lightweight wheel structure developed for rotor and stator use in very large low-speed electrical machines is presented. The wheel structure uses layered sheet-steel elements to form the spokes and rim. Friction between layers of the lightweight structure improves dynamic performance by increasing damping of the layered stack. To understand the vibration behavior of the lightweight wheel structure, a quarter-scale prototype was built and vibration testing was carried out to determine actual radial vibration responses. The measurement data was used to verify a numerical model with good results. There was good agreement between measured and predicted behaviors. Next, a full-scale stator wheel structure was similarly modeled to carry out a modal analysis of its dynamic behaviors. The predicted dynamic performance shows the wheel structure to be suitable for stator use in an 8 MW LC DD-PMSG embodiment based on the introduced lightweight, layered, sheet-steel wheel structure.
延伸閱讀
- 蔡定江、張璽良（2018）。Vibration Reduction Analysis of Dynamic Vibration Absorber in Beam Structure。載於中華民國振動與噪音工程學會（主編），中華民國振動與噪音工程學會論文集（頁159-166）。中華民國振動與噪音工程學會。https://www.airitilibrary.com/Article/Detail?DocID=a0000192-201806-201809260005-201809260005-159-166
- 吳易修（2002）。The Modification of Finite Element Model and Modal Analysis for the Stator Structure of the Industrial Motors〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200200583
- Wan, S. T., He, Y. L., Dou, L. J., & Sheng, X. L. (2015). Effect of Internal Power-Angle on Turbo-Generator Stator Vibration Characteristics under Eccentricity Faults. 中國機械工程學刊, 36(3), 211-220. https://www.airitilibrary.com/Article/Detail?DocID=02579731-201506-201510230002-201510230002-211-220
- Zhou, S., Ren, Z., Song, G., & Wen, B. (2015). Dynamic Characteristics Analysis of the Coupled Lateral-Torsional Vibration with Spur Gear System. International Journal of Rotating Machinery, 2015(), 240-253. https://doi.org/10.1155/2015/371408
- HAN, D. C., CHOI, S. H., & LEE, Y. H. (1995). Analysis of Vibration Characteristics for a Rotor-Bearing System Using Distributed Spring and Damper Model. International Journal of Rotating Machinery, 1995(), 277-284. https://doi.org/10.1155/S1023621X95000121