- 期刊
Numerical Simulation Analysis of Unfilled and Filled Reinforced Polypropylene on Thin-Walled Parts Formed Using the Injection-Moulding Process
延伸閱讀
- 馮維中（2008）。Numerical Simulation of a Surface Precision Machining Process〔碩士論文，國立屏東科技大學〕。華藝線上圖書館。https://doi.org/10.6346/NPUST.2008.00274
- Chou, C. C., Chiang, K. T., & Liao, Y. C. (2012). Experimental Investigation on the Design of Tool-Bar Combined the Plastic Layered Laminates for Vibration Reduction in the Precision Turning Process. 修平學報, (24), 85-107. https://doi.org/10.29548/BGYY.201203.0007
- 陳政順、郭金國、李國華、陳貞光（2009）。Numerical Simulation Analysis of Filling Process in Large Magnesium Die Casting Part。鑄造工程學刊，35(2)，28-36。https://doi.org/10.29809/JTFS.200906.0004
- 彭立函（2020）。Measurement and Simulation Verification of Fracture Toughness for Additive Manufacturing Specimens by Using Selective Laser Melting Process.〔碩士論文，國立清華大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0016-2502202114270485
- Chen, K. J., Xie, J. Y., & Chueh, C. C. (2023). Numerical Analysis of a 3D PCM-embedded Evaporator with Serpentine Flow Channels for Low-grade Waste Heat Recovery from the Organic Rankine Cycle. Journal of Aeronautics, Astronautics and Aviation, 55(1), 55-64. https://doi.org/10.6125/JoAAA.202303_55(1).05