新型不足驅動被動適應手指機構之設計

隨著機器人技術的發展與進步，機械手在不同領域的應用，逐漸往高自由度與低控制複雜度等方向發展。本研究針對現有的連桿驅動式機械手進行分析，歸納出其特性與設計需求，並以系統化的方法合成出所需的三自由度手指機構；接著建立不足驅動手指機構的運動分析數學模型，以及抓取特定外形物體時，機構與接觸點位置的數學模型，藉由靜力分析建立輸入力量、各連桿的受力及輸出力量的關係，可得到在各種狀態時所需要的推力以及在抓握特定外型的物體時，各個指節的接觸力與所需外力的關係；設定手指機構的設計限制、設計目標及設計參數，利用最佳設計的理論，求取機構的最佳尺寸，設計出合適的不足驅動被動適應手指機構，最後製造出實體機構模型以驗證。

關鍵字

不足驅動；被動適應；手指機構；機構合成；靜力分析；最佳化

並列摘要

With the rapid growth of robot application, a trend for robotic technology has been developed as manipulators with high mobility yet with less control complexity. To meet the need for such trend, design of underactuated passively adaptive finger mechanism has been proposed by some researches. This work analyzed the existing underactuated robotic mechanisms. The characteristics and the design requirement of such mechanisms are summarized. Mechanisms with three degrees of freedom are enumerated via mechanism synthesis method. The kinematic and static analyses of a mechanism are obtained from the synthesis. Subsequently, design optimization of the mechanism is discussed and conducted. Finally, a mock-up is built to test and validate the design.

並列關鍵字

underactuated ； passively adaptive ； finger mechanism ； mechanism synthesis ； static analysis ； optimum design

參考文獻

[2] 皮托科技股份有限公司網頁

[7] Y. Kurita et al., Human-sized Anthropomorphic Robot Hand with Detachable Mechanism at the Wrist, Mechanism and Machine Theory, Vol. 46,

pages 53-66, 2011

[11] B. Massa, S. Roccella, M. C. Carrozza and P. Dario, Design and Development of an Underactuated Prosthetic Hand, Proceeding of the 2002 IEEE International Conference on Robotics and Automation, pages 3374-3379, 2002

[13] K. Koganezawa and Y. Ishizuka, Novel Mechanism of Artificial Finger using Double Planetary Gear System, 2008 IEEE/RSJ International Conference on Intelligent Robots and System Acropolis Convention Center,

國際替代計量

新型不足驅動被動適應手指機構之設計

全文下載

主題瀏覽