壓電能量擷取器交流-直流功率轉換分析之實驗驗證

Experimental Validation of the Analysis of AC-DC Power Output for a Piezoelectric Energy Harvesting System

曾亮境(Liang-Ching Tseng)

指導教授 ： 舒貽忠

國立臺灣大學/工學院/應用力學研究所/碩士(2006年)

https://doi.org/10.6342/NTU.2006.01283

摘要

環顧大部分以壓電電源擷取系統為研究的文章，多以AC交流電輸出為主。本篇論文之主題則是以實驗為主，驗證一AC-DC交流轉直流之壓電電源擷取器理論模型之正確性，從理論模型計算出的位移量合實驗數據來作比對分析。此外還列出壓電電源擷取器位移量、電壓及功率之解析解，及欲獲得較佳功率時，設計壓電電源擷取器的設計準則。

關鍵字

壓電能量擷取 ； 壓電材料

並列摘要

As most of the researches about power harvesting concentrate on the AC power output. The main topic of this thesis is an experiment validation of an AC-DC power output analytic model, which correspond to the analytic solutions satisfactorily. The analytic solutions of displacements, voltage, power and the design criteria for achieving optimal power are also mentioned.

並列關鍵字

Piezoelectric power harvesting ； Piezoelectric materials

參考文獻

[50] 連益慶, 2005, 壓電能量擷取系統之分析研究

Scavenging for Wireless Sensor Networks: With Special Focus

on Vibrations, Kluwer Academic Publishers, Boston, MA.

1998, Trends in low power digital signal processing , Int. Symp.

2004, Power sources for wireless sensor networks, Lect. Notes