透過您的圖書館登入
IP:18.225.11.98
  • 學位論文

溫室多功能監測系統之開發─苗床植株遙測與環境因子量測

Development of Multi-Functional Monitoring System for Greenhouse Production─Remote Inspection of Seedlings’ Growth and Measurements of Environmental Factors

指導教授 : 陳世銘
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


本研究以光譜影像遙測技術為基礎,針對溫室自行開發出一套多功能監測系統,該系統所使用之彩色與黑白攝影機能夠結合近紅外光波段(780nm)濾鏡進行光譜影像之擷取,且能透過IEEE-1394介面控制攝影機之電子快門速度與增益值,再利用Matlab及LabVIEW軟體所自行撰寫之自動曝光演算法來獲得理想曝光量之光譜影像。 將所擷取到之光譜影像資料經由空間校正、影像縫合、灰階度校正之方法處理,獲得完整苗床縫合影像後,再經由苗床影像自動閾值背景分離之分析作業,以求得NDVI影像及苗株狀況,將此苗盤位置真值表透過無線網路經DataSocket傳輸至溫室可變率噴桿控制系統,以作為後續噴水模式之依據。 以往環控系統對於溫室內自動量測環境因子,皆屬於單點之測量,故無法得知溫室內之整體空間變異環境分佈,本研究則利用遙測系統巡走於溫室內,在進行擷取苗床光譜影像之同時,以DAQ卡擷取環境因子,包括溫、溼度及光量子通量,並將所擷取到之環境因子參數作整合分析,繪製成環境因子空間分佈等位線圖,以提供使用者管理植株生長狀況,以期發展出一套苗株自動化生產系統。

並列摘要


This study is aimed to develop a multi-functional monitoring system based on remote spectral imaging and environment sensing for seedling production in the greenhouse. The spectral images were grabbed with exposure time and signal gain controls through IEEE-1394 interface, and by a color camera and a monochrome camera with optical filter at 780 nm. The controlling program was developed to grab the good quality images using the automatic exposure algorithm with Matlab 6.5 and LabVIEW 7.1 software. To obtain necessary spectral information regarding tray locations and seedling growth on benches, a serial image processing procedures, including spatial calibration, image stitching, gray-level calibration and image segmentation were developed. The data of tray positions were transferred to the look up table (LUT) and delivered to the water management module through the datasocket server and wireless network. Besides, the environment sensing sub-system, including temperature, relative humidity, and photo-quantum measurements, was also developed with the PCI-6023 interface to analyze the spatial distribution of these parameters in the greenhouse. The information of environmental status will provide a better management for seedling growth. The further goal of the study is to provide a basis for developing an automatic seedling production system.

參考文獻


14. 邵泰璋、史天元。2000。類神經網路於多光譜影像分類之應用。航測及遙測學刊5(1):1-14。
17. 柯建全、黃膺任、艾群。1999。應用影像處理檢測荔枝果皮之顏色變化。農業機械學刊8(1):59-68。
26. 陳世銘、張金發、馮丁樹、游俊明、呂昆忠、王大立、田秉才、張文宏。1993。蔬菜育苗作業自動化—穴盤育苗真空播種系統。農業機械學刊2(3):56-64。
37. 陳益凰、曾義星。1999。應用多時段衛星影像辦識水稻田之研究。航測及遙測學刊 4(3):1-15。
43. 鄭祈全、邱祈榮、陳燕章。1997。應用遙測方法估測台灣杉林分之葉面積指數。台灣林業科學 12(3):309-317。

被引用紀錄


李柔靜(2009)。番茄採收機械視覺系統之研究〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2009.03364
林慧美(2008)。導入RFID技術於溫室種苗精準栽培與生產履歷之研究〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2008.03256
陳加增(2007)。應用智慧型光譜資訊分析於蔬菜植株氮含量檢測之研究〔博士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2007.02422
張晉倫(2006)。應用溫室內多功能監測系統於甘藍種苗生長性狀判別之研究〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2006.10414
謝騄璘(2006)。飽和脈衝葉綠素螢光影像系統之建立 及於植物光熱逆境生理之應用〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2006.02327

延伸閱讀