奈米壓印之印器與壓印

Mold Fabrication and Nanoimprint

施繼正(Ji-Jheng Shih)

指導教授 ： 謝志誠

國立臺灣大學/生物資源暨農學院/生物產業機電工程學研究所/碩士(2005年)

https://doi.org/10.6342/NTU.2005.02955

摘要

奈米壓印(Nanoimprint lithography, NIL)是一種低成本且具有高生產力的非傳統微影技術。奈米印器（即母模）之製造上，將採用電子束微影技術及電感式耦合電漿乾蝕刻的製程進行，製造出高深寬比之母模結構。壓印設備系統上，將採用熱壓印技術，進行奈米結構之圖形轉移。

關鍵字

奈米壓印 ； 微機電 ； 奈米機電 ； 光阻材料

並列摘要

The project is aimed at developing the mold fabrication and the imprinting recipe for nano-imprint (NIL). For fabrication of a nano-imprinting mold, the electron beam lithography and ICP(Inductively Coupled Plasma) dry etching will be mainly employed to structure the mold of high aspect ratio.
As for the nano-imprinting process, the hot-embossing will be employed, and the molds will be tested to form the nanopatterns, and then replicate the pattern to the polymer on the substrate.

並列關鍵字

Nanoimprint ； Hot-embossing ； Electron beam ； Mold

參考文獻

[01] 王湧鋒。2004。奈米直寫儀光學頭之奈米壓印製作方法的先導性研究。碩士論文。台北：台灣大學應用力學研究所

[02] Austin M.D. and Chou S.Y., 2002.Fabrication of 70 nm channel length polymer organic thin-film transistors using nanoimprint lithography. Apply. Phys. Lett. Vol.81 ,No.23,pp.4431-4433

[03] Beck M., M. Gracyzk, I. Maximox, E.-L. Sarwe, T.G.I. Ling, M. Keil, and L. Montelius,2002.Improving stamps for 10 nm level wafer scale nanoimprint lithography,Microelectronic Engineering 61-62,pp.441-448

[05] Chen Kuo-Shen, Arturo A. Ayón, Xin Zhang, and S. Mark Spearing,2002. Effect of Process Parameters on the Surface Morphology and Mechanical Performance of Silicon Structures After Deep Reactive Ion Etching (DRIE), Journal of Microelectromechnical Systems, vol. 11, No. 3,pp. 264-275.

[06] Chou S.Y.,Krauss P.R.,and Renstrom P.J.,1995. Fabrication of nanoimprint Using sub-25 nm Imprint Lithography ,Apply. Phys. Lett. 67(21),pp.3114-3116