- 學位論文
利用基於有限元素分析之平均應力準則預估含中心圓孔複合材料平板之破壞強度
Predicting the Notched Strength of Composite Plates Each with a Center Circular Hole by a Finite Element Based Average Stress Criterion
若您是本文的作者，可授權文章由華藝線上圖書館中協助推廣。
延伸閱讀
- 李有豐、馬鈺婷、徐增興（2011）。以有限元素法模擬中高型RC剪力牆側推之裂縫分佈及裂縫演化過程。結構工程，26(2)，27-56。https://doi.org/10.6849/SE.201106_26(2).0002
- 蔡宗諺（2015）。以邊界元素法分析含 雙橢圓孔洞異向性彈板受彎矩作用之應力集中現象〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2015.00229
- 陳建霖（2005）。向量式有限元素法於平面構架彈塑性及斷裂之應用〔碩士論文，中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200500396
- Atangana, A., Ahmed, O. A., & Bildik, N. (2013). A Generalized Version of a Low Velocity Impact between a Rigid Sphere and a Transversely Isotropic Strain-Hardening Plate Supported by a Rigid Substrate Using the Concept of Noninteger Derivatives. Abstract and Applied Analysis, 2013(), 631-639-860. https://doi.org/10.1155/2013/671321
- Naduvinamani, N. B., Apparao, S., & Hiremath, A. G. (2014). Effect of Surface Roughness and Viscosity-Pressure Dependency on the Couple Stress Squeeze Film Characteristics of Parallel Circular Plates. Advances in Tribology, 2014(), e1-7. https://doi.org/10.1155/2014/387413