蘆竹鄉成衣廠火災場模式數值分析

Fire Field Model Simulation and Analysis for Ready-made clothing factory in LuChu Township

謝愉隆(Yu-Lung Hsieh)

指導教授 ： 林誠興

元智大學/工程學院/機械工程學系/碩士(2009年)

摘要

摘要
國內許多中小型工廠都屬鐵皮屋形式搭建，鐵皮屋易於施工、建築速度快且經濟便宜，以致人民接受度高而普遍興建。常見廠房住宅合併使用，即上層為一般住宅使用，下層為廠房加工作業區。本案例就是典型的鐵皮工廠，作為成衣製造廠房，廠房狹長，內部囤積大量的成衣布料及加蓋宿舍供員工或家屬居住，一旦發生火災，常常造成重大人員傷亡及財物損失。
本研究是以蘆竹鄉成衣工廠火災為研究對象，並利用「FDS 」軟體進行火場模擬分析，以電腦數值模擬鐵皮屋廠房火場各物理現象，探討火場中的煙流、CO濃度及上層溫度等參數的變化，以了解火場中溫度傳遞、濃煙擴散等狀況，針對火場主要影響因素，改變各種不同參數設定，探討相關參數對火災的影響，並期許本研究成果能提供設計人員對鐵皮屋廠房在防火工程有參考價值，以降低人員傷亡及財產損失。

關鍵字

場模式 ； 成衣廠 ； 上層溫度

並列摘要

ABSTRACT
In Taiwan, many middle and small factories are built in the type of iron-sheet buildings which are easily to be constructed with high speed and low expense. Therefore, it is commonly accepted and constructed by the people here. Normally it is used both for workshop and housing, that is, the upper floor for general housing use and the lower floor for products processing area. This case is a typical iron -sheet factory for processing, ready-made clothing. It is a long and narrow building, inside which piled up massive ready-made clothing material and additional dormitory for the staff or family member to live. Once the fire happens, usually causes the significant personnel casualty and property damage.
This research takes the ready-made clothing factory in LuChu township as the object of study, and uses the Fire Dynamics Simulator ( FDS ) software for fire simulation and analysis. Computational method simulates the various physical phenomenon of the fire scene and discusses the changes of parameters about smoke stream, carbon monoxide (CO) concentration and upper layer temperature, in order to understand the temperature transmission and the smoke transportation in fire field. Focusing on the major causes of the fire scene, changing various parameter sets, and discussing the influences of related parameters to the fire, hoped that this research result is worth a reference to provide the designers for fire protection project on the iron-sheet factory, in order to reduce the personnel casualty and property damage.

並列關鍵字

field model ； ready-made clothing factory ； upper temperature distribution

參考文獻

【19】徐瑞祥、林誠興、黃彰斌，”鋼筋混凝土樑受火害後之撓曲能力數值模擬”，科技學刊(已投稿)

【2】T.X. Qin, Y.C. Guo, C.K Chan, K.S. Lau, W.Y. Lin,〝Numerical simulation of fire-induced flow a stairwell〞,Building and Environment, pp.183-194, 2005.

【3】Zhiqiang Zhai, Qingyan (Yan) Chen,〝Numerical determination and treatment of convective heat transfer coefficient in the coupled building energy and CFD simulation〞Building and Environment, pp.1001-1009, 2004.

【4】Noah L. Ryder, Jason A. Sutula, Christopher F. Schemel, Andrew J.Hamer, Vincent Van Brunt, 〝Consequence modeling using the fire dynamics simulator〞, Journal of Hazardous Materials, pp.149-154,2004.

【6】John H. Mammoser III, Francine Battaglia, 〝A computational study on the use of balconies to reduce flame spread in high-rise apartment fires〞, Fire Safety Journal, pp.277-296, 2004.