限制理論下產品組合對瓶頸負載之研究

Investigating the Impact of Products Mixed on Bottleneck Load by the Theory of Constraints

鄭智仁(Chih-Jen Cheng)

指導教授 ： 張百棧

元智大學/工程學院/工業工程與管理學系/碩士(2007年)

摘要

本論文是以限制理論(Theory of Constraint )的步驟為基礎，依據群組技術(Group Technology)將產品組合(Products Mixed)簡化，以及產能規劃(Capacity planning)應用的技術，考量生產週期(Cycle time)因素，運用Visual Basic程式的演算，呈現瓶頸資源之堆疊情形，找出產品組合變化對瓶頸資源的影響，進行產品組合的最適調整。解決印刷電路板(Printed Circuit Board)廠在生產規劃階段，以最快方式決定產品組合，進行產能調整與準備，不使不當的規劃造就在現場執行階段瓶頸資源的變動，影響生產系統的產出，為本研究根本之目的。

關鍵字

限制理論 ； 群組技術 ； 產品組合 ； 產能規劃

並列摘要

The research is based on the theory of constraints and procedures of group technology to simplify the products mixed. Capacity planning is applied considering the factor of cycle time to display the stacking condition of bottleneck resources by Visual Basic algorithms, and then the impact of the changes of products mixed can be found out for optimal adjustment of products mixed.

The objective of the research is to help PCB (Printed Circuit Board) factories decide products mixed in the shortest time during production planning stage for optimal capacity adjustment and preparation, and to avoid any changes of bottleneck resources made during the execution stage caused by inappropriate planning which can affect the output of production systems.

並列關鍵字

Theory of Constraints ； Group Technology ； Products Mixed ； Capacity Planning

參考文獻

[36] 呂春美，「晶圓測試廠產能規劃研究」，中原大學工業工程與管理系，碩士論文，2003。

[40] 徐梅芳，「半導體封裝廠產能規劃研究」，中原大學工業工程系，碩士論文，2005。

[1] P. R. Philipoom,M. K. Malhotra, and J. B. Jensen,「An Evaluation of Capacity Sensitive Order Review and Release Procedure in Job Shops」，Decision Sciences，Vol.24,No. 6,pp. 1109-1133,1993.

[3] D. Bergamaschi, “Order Review and Release Strategies in a Job Shop Environment: a Review and a Classification”, International Journal of Production Research, Vol. 35, No. 2, pp. 399-420, 1997.

[4] P. M. Bobrowski, “Implementing a Loading Heuristic in a Discrete Release Job Shop”, International Journal of Production Research, Vol. 27, No. 11, pp. 1935-1948, 1989.