本論文以ANADIGICS 公司所研製的AWU-6601 射頻功率放大 器作為研究主體,利用周邊電路進行優化研究。本文運用德州儀器公 司所研製的TPS 62040 直流轉換器,轉換電池壓降,供給功率放大 器所需電壓,藉此改善功率放大器效率,再輔以低通濾波電路,濾除 因交互調變產生的低頻因素透過電源電路和偏置網路反饋回輸入端 等問題,進而改善ACLR 的不對稱性,提高功率放大器的線性度。最 後將此功率放大器進行X-參數的測試與模擬,捕捉其非線性參數, 可以加速了解放大器的各項數據,減少在實體產物下的反覆測試,幫 助研發者縮短研發時間,並提高設計精準度與效率,本文將其設計方 式與量測結果探討其特性與未來改善方向。
The optimization studies of RF power amplifier (PA) in AWU-6601 MMIC by ANADIGICS Inc. for WCDMA system are presented, by using some peripheral circuitries including DC-DC converter TPS-62040 from TI Inc. and low pass filter at the power supply. The DC-DC converter improves the PA efficiency by adjusting the handset battery to the optimum voltage; and the associated low pass filter reduces the inter-modulation distortion caused by the low frequency interference from power supply circuit to improve ACLR asymmetry. Finally, the X-parameter measurements are performed for the PA to demonstrate the various nonlinear parameters acquired by the X-parameter computation to accelerate the RD cycle accurately and efficiently. The thesis also addresses the future directions for PA designs and measurements.