透過您的圖書館登入
IP:13.58.201.235
  • 學位論文

電流式二階濾波電路之設計與模擬

Design and Simulation a Current-Mode Second-Order filter

指導教授 : 張俊明
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


本文將以運算轉導放大器(Operational Transconductance Aplifier,OTA)及電容器(Capacitance)為主動元件,設計一電流式(OTA-C)二階濾波電路,並使用H-SPICE模擬軟體搭配TSMC0.35μm製程參數,對電路進行模擬與分析。 本文電路模擬操作頻率均使用高頻1MHz,來驗證理論值及模擬值是否相近。

並列摘要


In this thesis, we utilize OTA(Operational Transconductance Amplifier) and Capacitance as pro-active component to design a Current mode Second-Order Filter circuit. We Simulation and Analysis this circuit by using the H-SPICE simulation software with TSMC0.35μm Process parameters. In this thesis, we all use high frequency band 1MHz to operated the circuit simulation and verify wheather the theoretical values and Hypothesis values are similar or not .

參考文獻


[3]M.T.Abuelma’atti,and A.Bentrcia,”New Universal Current-Mode Multiple-Input Multiple-Output OTA-C Filter”,The 2004 IEEE Asis-PacificConference on Circuits and Systems,Tainan,Taiwan,pp.1037-1040,Dec.2004
[5]Y.Sumi,T.Tsukutani,and Y.Fukui,”A Realization of Biquadratic Circuit Transfer Functions using OTA-C Integrator Loop Structure”,Proceedings of 2005 Inernational Symposium on Intelligent SignalProcessing and Communication Systems,jpp.13-16,Dec.2005
[6]A. J. Grossman, “Synthesis of Tchebyscheff parameter symmetrical filters,” Proc. IRE,vol. 45, pp. 454–473, Apr. 1957.
[8]L. Wanhammar, Analog Filters using MATLAB: Springer, 2009.
[1]C.M.Chang,”New Multifunction OTA-CBiquads”.IEEE Transactions on Circuits and Systems-II:Analog and Digital Signal Processing,Vol.46,no.6,pp.820-824,June 1999.

延伸閱讀