應用於音頻之低功率高效能三角積分調變器設計與實現

The Design and Implementation of Low-power High-performance Delta-Sigma Modulators for Audio Application

施登耀(Deng-Yao Shi)

指導教授 ： 郭建宏

國立臺灣師範大學/科技學院/應用電子科技研究所/碩士(2011年)

摘要

在現今製程技術不斷的進步下，積體電路設計已進入了奈米時代，此進步不但大大的降低了電路的面積，相對上電源供應電壓也大幅的下降。高效能、低功率的晶片陸續地推陳出新，以及人們對於產品輕薄短小和電池的長時效性要求，低功率積體電路技術發展有愈來愈急迫的需要。然而，電源電壓的下降，雖可有效地節省數位電路的消耗功率，但卻反而增加類比數位轉換電路設計的困難。在許多應用當中，類比數位轉換器(Analog-to-digital converter)佔著舉足輕重的角色，而有許多種架構可以來完成。三角積分調變器(Delta Sigma Modulator)對類比電路的非理想特性並不敏感，這些特性包含元件之間的不匹配、運算放大器的增益等等。然而這些特性恰巧對低功率電路來說尤其重要。三角積分調變器這項技術基本上非常適合用來實現高解析度、高準確度、及窄頻要求的類比數位轉換器，因此在儀器、音頻及通信上的應用已相當的普遍。

在本論文中，提出了兩種新穎的架構並且實現，一是改良強健式多級雜訊頻移架構(Sturdy Multi-stage Noise Shaping, SMASH)，降低運算放大器對電壓增益的需求，並結合數位前饋架構(Digital feed-forward)，增加輸入動態範圍且降低失真；二為，三角積分調變器使用逐次逼近暫存式(Successive Approximation Register, SAR)類比數位轉換器，此架構可有效降低功率消耗和電路複雜度。兩架構實現所使用的製程技術分別為TSMC 90-nm 1P9M CMOS與TSMC 0.18-mm 1P6M CMOS；設計的供應電壓皆為1.2 V、頻寬為音頻應用的25 kHz；模擬結果分別達到的最大SNDR為63 dB與82 dB；電源功率消耗分別為813 mW與463 mW。

關鍵字

類比數位轉換器 ； 三角積分調變器 ； 強健式多級雜訊頻移架構 ； 數位前饋架構 ； 逐次逼近暫存式類比數位轉換器

並列摘要

The fabrication of integrated circuit has entered the nano-grade with the improvement of modern technology. This progress not only reduces the circuit area greatly, but also lowers the supply voltage significantly. Chips with high-performance and low-power have been proposed constantly today, the main demand of these chips nowadays is more power saving for portability. Hence, the low power technology has become a trend in modern integrated circuit designs. Although the decreasing of the supply voltage can effectively save power consumption of digital circuits, it also increases the difficulty of designing analog-to-digital converters (ADCs) circuits, which plays an important role in many applications. Fortunately, Delta-sigma modulators are insensitive to the imperfections of the analog components, including the mismatch between elements, the gain of OPAMPs, etc… which are of great influence to low-power chips. Therefore, they’re usually designed and applied for high-resolution systems such as instruments, audio devices, and communication devices.

In this thesis, we propose and construct two new structures. The first one is an improved Sturdy Multi-stage Noise Shaping (SMASH) structure. Here are three key-points of SMASH: (a) it reduces the gain requirement of the operational amplifier (OPAMP) (b) analogy modulator adopting the Digital feed-forward (DFF) path (c)input dynamic range larger than conventional DSM with the distortion of modulator reduced. The second structure is a  modulator using successive approximation register (SAR) ADC. This architecture reduces power consumption and simplifies circuit complexity. Two of the modulators are constructed in 90-nm 1P9M CMOS and 0.18-m 1P6M CMOS process technology, respectively. Both modulators process 25-KHz audio-band, with 63 dB and 82dB peak SNDR. Total power dissipations are 813 mW and 463 mW, respectively.

並列關鍵字

Analog-to-digital converter ； delta-sigma modulator ； Sturdy Multi-stage Noise Shaping ； Digital feed-forward ； successive approximation register ADC

參考文獻

[2] D. A. Johns, K. Martin, Analog Integrated Circuit Design, John Wiley & Sons, Inc., 1997.

[3] J. Silva, U. K. Moon, J. Steensgaard, and G. C. Temes, “Wideband Low-Distortion Delta-Sigma ADC Topology,” Electron. Lett., vol. 37, pp. 737-738, Jun. 2001

[6] K. C. H. Chao, S. Nadeem, W. L. Lee, and C. G. Sodini, “A Higher-Order Topology for Interpolative Modulators for Oversampling A/D Converters,” IEEE Trans. Circuits Syst., vol. 37, no. 3, pp. 309-318, Mar. 1990.

[8] B. DelSignore, D. Kerth, N. Sooch, anf E. Swansooon, “ A Monolithic 20-B Delta-Sigma Modulator,” IEEE J. Solid-State Circuits, vol. 25, no. 6, pp. 1311-1317, Dec. 1990.

[9] T. Ritoniemi, T. Karema, and H. Tenhunen, “The Design of Stable High Order 1-Bit Sigma-Delta Modulators,” in Proc. IEEE Intel. Symp. Circuits Syst., May 1990, pp. 3267-3270.