透過您的圖書館登入
IP:18.218.145.131
  • 學位論文

LabVIEW軟體之介面設計與應用

Interface Design and Applications of LabVIEW Software

指導教授 : 黃昭明
共同指導教授 : 郭松村
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


近十幾年來,LabVIEW已被廣泛應用於學術界與產業界。學術界通常藉由LabVIEW來輔助儀器量測,並豐富研究內涵;產業界則藉由LabVIEW的引入來提昇產品的附加價值,並提高產業競爭力。鑑於坊間參考書籍均僅針對LabVIEW的部份介面應用進行探討,因此無法滿足使用者需求,也無助於LabVIEW的推廣。為廣泛探討LabVIEW的介面應用,本論文共探討五種不同介面的設計方法與程式撰寫技巧,包含:資料擷取卡、dsPIC數位訊號控制器、可程式控制器、串/並列通訊埠、以及藍芽無線通訊等。由實驗結果證實,本論文所提供的介面設計可以成功地與LabVIEW軟體進行通訊,研究成果可提供學術界與產業界建構人機介面時的參考依據。

並列摘要


In recent ten years, LabVIEW has already widely used in the academic and industrial circle. The academia is usually aided by LabVIEW for instrument measurement and research intension. The industrial circle promotes the additional value of the products by the inclusion of LabVIEW and improves industry's competitiveness. Due to the reference books published by many authors only introduce part of the interface application, it can’t satisfy the requirement of the users. Therefore, it is helpless to the popularization of LabVIEW. To widely study the interface application of LabVIEW, this thesis introduces the design and programming techniques of five different interfaces. These interfaces include data acquisition device, dsPIC digital signal controller, programming logic controller, serial/parallel communication port, and Bluetooth wireless communication. The experiment results have verified that the proposed interface design can successfully communicate with LabVIEW and can offer valuable references for academic and industrial circle to construct the man-machine interface.

參考文獻


[1]A. Gani and M. J. E. Salami, “A LabVIEW based Data Acquisition System for Vibration Monitoring and Analysis,” Student Conference on Research and Development, 2002, pp. 62-65.
[2]G. Yang and M. Chen, “LabVIEW Based Simulation System for the Output Characteristics of PV Cells and the Influence of Internal Resistance on It,” International Conference on Information Engineering, July 10-11, 2009, pp. 1-4.
[5]Y. Z. Tian, L. G. Jiang, M. Lin and B. He, “LabVIEW and CRIO Linear Control of a Coaxial Two-wheeled Mobile Robot” The 3rd International Conference on Measuring Technology and Mechatronics Automation (ICMTMA), Jan. 6-7, 2011, pp. 1-4.
[6]J. Sun, P. Lu, Y. Q. Fu, R. X. Liu, and L. Chen, “The Implementation and Application of Programming Port Communication Between Industry PC and Mitsubishi FX Series PLC,” The 3rd International Conference on Intelligent System and Knowledge Engineering, Nov. 17-19, 2008, pp. 1-4.
[8]陳敬旻,無線心電圖量測系統及其在居家保健之應用,碩士論文,電機工程學系碩博士班,國立成功大學,2005。

被引用紀錄


陳旭宏(2012)。利用LabVIEW與可程式邏輯控制器作真空濺鍍機故障分析〔碩士論文,國立虎尾科技大學〕。華藝線上圖書館。https://doi.org/10.6827/NFU.2012.00137

延伸閱讀