田口式實驗設計法於改善筆記型電腦中央處理器過熱問題研究

王宏嘉(Hung Chia)

指導教授 ： 葉英傑

國立中央大學/管理學院/工業管理研究所/碩士(2007年)

摘要

近年來CPU散熱片的製造技術已受到高度重視，且在開發高效能CPU的同時，已成為一種不可或缺的技術。目前電腦使用者，需要功能增多， CPU工作頻率隨之增加，設限於筆記型電腦空間，散熱不易，應用田口方法找出筆記型電腦CPU過熱所產生融化現象之問題。

關鍵字

田口式實驗設計法

並列摘要

In recent years, the manufacturing technology of CPU heat sinks has got much attention and becomes indispensable for developing the high-performance CPUs.The first CPU design had low working frequency and low heat producing.The purpose of the study is to use Taguchi method to improve CPU overheat of notebook computer.

並列關鍵字

CPU

參考文獻

1. M. Mochizuki, Yuji Saito, K. Goto and T. Nguyen, “ Hinged Heat Pipes for Cooling Notebook PCs”, 13th IEEE SEMI-THERM Symposium, pp. 64-72，1997.

2. H. Xie, M. Aghazadeh, W. Lui and K. Haley, “ Thermal Solutions to Pentium Processors in TCP in Notebooks and Sub-Notebooks”, IEEE Transactions on Components, Packageing and Manufacturing Technology, Part A, Vol.19, No1, pp. 54-65, March, 1996.

3. Morrison, A.T., ”Optimization of Heat Sink Fin Geometries for Heat Sinks in Natural Convection, ” Inter Society Conference on Thermal Phenomena”, 1992.

5. J. R. Rujano , R. Cardenas , M.M. Rahman and W.A.Moreno , “Development of a Thermal Management Solution for a Ruggedized Pentium Based Notebook Computer”, 1998IEEE Inter Socirty Conference on Thermal Phenomena, pp. 8-14, 1998.

6. Heng-Chieh Chien, Ming-His Tseng, Chih-Yao Wang, and Chu Chun-Hsun, ”The Study of Micro-Fin Heat Sinks for Electronic Cooling Applications” Seventeenth IEEE SEMI-THERM Symposium, 2001.