軟體無線電任意基頻訊號接收機系統設計及實現

Design and Realization for an Arbitrary Base Frequency Receiver in Software Defined Radio

魏建豪(Chang-Hao Wei)

指導教授 ： 陳逸民

國立中央大學/資訊電機學院/通訊工程研究所碩士在職專班/碩士(2008年)

摘要

本文提出一種經接收由外部傳進的類比訊號後，經過轉換成為數位訊號，透過現場可程式化閘陣列（FPGA）進行訊號解調等處理，再經由通用串列匯流排（USB）傳進電腦，最後由電腦軟體負責顯示、儲存的一種平台。藉由FPGA的多樣化設計性與USB 2.0的高速傳輸，達成一種可以由電腦方便地顯示、分析、儲存訊號的傳輸平台，而且接收的類比訊號，讓電腦參與類比訊號的接收可以有更簡單直接的方式，達到以軟體無線電為基礎的接收平台。

關鍵字

軟體無線電 ； 通用串列匯流排 ； 現場可程式化閘陣列

並列摘要

In this thesis, we achieve a platform that receives analog signals and converts them into digital signals. By using Field Programmable Gate Array, this platform processes the digital signals in demodulation or others processes. The processed signals be passed to personal computer by Universal Serial Bus. Finally, the computer’ program shows or saves the signals. We realize this platform in the idea of FPGA’s variously design and USB’s high speed. And the signals received by computer are analog. The platform supplies a convenient and direct way for computer in processing analog signals. The purpose is to realize a receiver platform that is convenient by using computer to show, analyze and save the signals. This platform uses the idea of Software Defined Radio.

並列關鍵字

Software Defined Radio ； Field Programmable Gate Array ； Universal Serial Bus

參考文獻

[4] Cypress Semiconductor Corporation, “EZ-USB FX2 Technical Reference Manual”, Version 2.2.

[10] Getting Started with uVision2, Keil Software, 2001.

[12] EZ-USB FX2 Development Kit Manual Getting Started, Cypress Semiconductor Corp, 2001.

[13] Simon Haykin, “Communication System 3rd Edition”,WILEY,1931-.

[1] Memec Design, “Virtex II V2MB1000 development Board User’s Guide”, Version 3.0 , December 2002.