以觸控面板實現壓力感測器之研究

Research on touch of pressure sensors

黃思淵(Ssu-Yuan Huang)

指導教授 ： 張榮森

國立中央大學/理學院/光電科學研究所碩士在職專班/碩士(2014年)

摘要

本研究進行了以觸控面板實現壓力感測器之研究與發展；從概念發
展、觸控模組、壓力感測器設計及各個元件的加工技術探討，以及程式軟
體的開發。本研究之壓力感測器以電容式觸控面板為感測器，將每點所量
測之數值轉換為壓力值，並計算得到該點壓力。本研究所發展之技術可用
於時下手機之App 運用軟體，結合遊戲與健康相關之運用軟體，相當值得
進一步研究與發展。

關鍵字

壓力感測器 ； 電容式觸控

並列摘要

The study carries out research and development for achieving pressure
sensors through touch panels. The content of the study introduces from
concept development, touch module, design of pressure sensor and discussion
for the processing technology of each components, as well as software
program development. Using capacitive touch panel sensor as a pressure
sensor and converts the outcome of numeric of each measured point to
pressure value, then calculate them and get the pressure of the point.The
development of technology that can be applied on App on nowadays smart
phones, which combined with the relation to games and health software. It’s
quite worthy of further research and development.

並列關鍵字

touch panel ； pressure sensor

參考文獻

[1] Virendra N. Mahajan, “Optical Imaging and Aberrations”, Part I-Ray

Geometrical Optics, SPIE PRESS, Bellingham, 1998.

[2] Joseph W. Goodman, Introduction to Fourier Optics, McGraw-Hill, New

York (1996)

[8] Lasmax CO.,Ltd. Website