白光LED之封裝效率之研究

The study of package efficiency for white LEDs

李惇儒(Dun-Ru Li)

指導教授 ： 孫慶成

國立中央大學/理學院/光電科學研究所/碩士(2011年)

摘要

本論文中，我們將研究不同白光LED封裝型式其封裝效率之差異，利用已建構之YAG螢光粉模型在相同色溫下，分析六種封裝型式在封裝效率上的差異，並討論其封裝效率差異的原因，再探討改變基板反射率與晶片吸收等參數對封裝效率的變化。
接著以實際封裝驗證六種封裝之效率，首先量測得到基板反射率，接著實際進行六種封裝方式，最後分析比較六種封裝其實驗及模擬的差異。

關鍵字

螢光粉 ； 封裝效率 ； 白光LED

並列摘要

In this thesis, we study the package loss for six white LED package types. Based on the YAG phosphor model, we build up six white LED package types in our simulation. Under the same CCT, we calculate package loss between six different packages and analyze the effect of the different LED package types. We also discuss the influence of the package loss by changing the reflectivity of the substrate and the absorption coefficient of the die.
In order to verify the simulation data, we try to do the experiments for investigation of the package loss of the six LED package types. First, We measure the reflectivity of substrate, then we do the six geometry of LEDs package. Finally, we compare with simulation and experimental data and analyze the difference between simulation and experiment.

並列關鍵字

phosphor ； white LED ； package efficiency

參考文獻

[39] 紀葦世，高效能YAG螢光粉之特性量測與模型，元智大學光電工程研究所碩士論文，民國九十九年。

[1] N. Holonyak, Jr. and S. F. Bevacqua, “Coherent (visible) light emission from Ga(As1-x Px) junctions,” Appl. Phys. Lett. 1, 82-83 (1962).

[2] S. Nakamura, T. Mukai, and M. Senoh, “Candela-class high-brightness InGaN/AIGaN double-heterostructure blue-light-emitting diodes,” Appl. Phys. Lett. 64, 1687-1689 (1994).

[3] S. Nakamura, T. Mukai, and M. Senoh, “High-brightness InGaN/AIGaN double-heterostructure blue-green-lightemitting diodes,” J. Appl. Phys. 76, 8189-8191 (1994).

[6] J. Yu, C. F. Guo, Z. Y. Ren, and J. T. Bai, “Photoluminescence of double-color-emitting phosphor Ca5(PO4)3Cl:Eu2+, Mn2+ for near-UV LED,” Opt. Laser Technol. 43, 762-766 (2011).