透過您的圖書館登入
IP:3.145.143.239
  • 學位論文

運用FMEA於發展動態式預防保養規劃之研究-以P空軍機場為例

Applying FMEA Techniques in Developing Dynamic Preventive Maintenance Program – A Case Study of P Air Force Airport.

指導教授 : 陳啟政
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


摘要 論文名稱:運用FMEA於發展動態式預防保養規劃之研究-以P空軍 機場為例 總頁數:87 學校名稱:國立屏東科技大學 系(所)別:企業管理系 畢業時間及摘要別:106學年度第二學期碩士學位論文摘要 研究生:龔姵潔 指導教授:陳啟政 博士 論文摘要內容: 車輛狀態的衰退是無法避免的,要確保良好的車輛運作狀態,必須以動態式預防性的角度進行保養,唯有確實掌握車輛狀態,才能最適切地執行保養本研究旨在運用失效模式與效應分析(Failure Mode and Effect Analysis,FMEA)系統方法,評估失效風險優先數(Risk Priority Number, RPN),提出一套預防措施、選出關鍵優先順序、研擬出預防維護保養對策,針對潛在可能出現的失效,預先做好防範措施。 最後,本研究實證結果發現,FMEA 發展出的動態式預防保養規劃運用於車輛維護保養確實能使預防機制發揮良好效益,減低失效風險,確保誤失獲得預防與改善。 關鍵字:失效模式與效應分析(Failure Mode and Effect Analysis, FMEA)、風險優先數(Risk Priority Number, RPN)、預防保養(Preventive Maintenance)。

並列摘要


Abstract Title of thesis:Applying FMEA Techniques in Developing Dynamic Preventive Maintenance Program – A Case Study of P Air Force Airport. Total page:87 Name of Institute:Department of Business Administration, National Pingtung University of Science and Technology Graduate date:June, 2018 Degree Conferred:Master Name of student:Pei-Chieh Kung Adviser:Chee-Cheng Chen, Ph.D. The contents of abstract in this thesis: It is an important concern for vehicles maintenance on how to avoid negative effects due to vehicles deteriorations and failures. Maintenance executed preventively is such a choice to maintain vehicles in proper operations. Hence, dynamic preventive maintenance policies can be realized or carried out. The purpose of this study is applying the Failure Mode and Effect Analysis (FMEA) system method to evaluate the priority of failure risk (Risk Priority Number, RPN), working out the solutions of preventive measures, selecting priorities of improvement, developing preventive maintenance methods, that takes out and prevent possible failures effectively. Finally, the results are shown the application of FMEA developed dynamic preventive maintenance program that was utilized in vehicle maintenance is able to not only reduce the risks of failure, but also ensure the errors being prevented and improved. Keywords:Failure Mode and Effect Analysis(FMEA), Risk Priority Number(RPN), Preventive Maintenance

參考文獻


參考文獻
中文部分
1. 包保長,2007,TAME石化工廠之FMEA研究,義守大學資訊工程研究所碩士論文。
2. 李裕欽,2008,家電產品之失效模式與效應分析及其關鍵性分析,正修科技大學碩士論文。
3. 吳月鑫,2008,應用失效模式與效應分析於採購 作業程序之改善研究-以南部某大學為例,正修科技大學 工業工程與管理研究所碩士論文 。

延伸閱讀