- 期刊
Bending Moment Assessment at L5/S1 and Parameter Optimization Using Taguchi Design during Lifting Task
並列摘要
This paper reports on the investigation of the effect of lifting parameters on bending moment at the lower back. The experimental study has been conducted under varying load weights, horizontal location of load from L5/S1 and lifting technique (stoop, full squat and lifting device). The design of experiments approach using Taguchi's orthogonal array was used. The level of importance of the parameters on bending moment has been determined using the analysis of variance (ANOVA). After implementing a lifting device 26-34 % reduction in bending moment at L5/S1 has been observed.
延伸閱讀
- 呂淮熏、黃能崇、張清靠（2007）。Optimal Parameter Design of High-Speed End Milling Using Taguchi-Principle Component Analysis Approach。技術學刊，22(4)，325-333。https://doi.org/10.29507/JT.200712.0005
- 吳俊義（2001）。The Study of the Optimal Parameter Setting to Capacitor Multi-Function Test Machine(M3300) by Using Taguchi Method〔碩士論文，元智大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0009-0112200611352862
- 徐茂恩（2009）。Parameters Optimal Procedure Design by Using Taguchi Approach for Proton Exchange Membrane Fuel Cells〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2009.10382
- 邱慧珊（2010）。EPS Extrusion Parameters Optimization Using Taguchi Method〔碩士論文，國立虎尾科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0028-0508201002452300
- Neseli, S. (2014). Optimization of Process Parameters with Minimum Thrust Force and Torque in Drilling Operation Using Taguchi Method. Advances in Mechanical Engineering, 2014(), 606-615. https://doi.org/10.1155/2014/925382