Journal of Applied Science and Engineering

Published by Tamkang University Press

1.30

Impact Factor

2.10

CiteScore

Nuan-Hsuan Ho This email address is being protected from spambots. You need JavaScript enabled to view it.1 and Dave Ta-Teh Chang2

1Department of Traffic Science, Central Police University, Taoyuan, Taiwan 333, R.O.C.
2Department of Civil Engineering, Chung Yuan University, Taoyuan, Taiwan 320, R.O.C.


 

Received: August 29, 2012
Accepted: November 1, 2013
Publication Date: December 1, 2013

Download Citation: ||https://doi.org/10.6180/jase.2013.16.4.11  


ABSTRACT


This research utilized the Infrared Thermograph, the latest aviation technology for inspection and quality control in Fiber Reinforcement Polymer (FRP). This technology has the capacity to quickly locate any defect present in the FRP composite matrix, as well as to accurately measure the extent of the defect. The experiment employed a parametric study, constructing a concrete slab structure with an FRP bond subjected to thermal analysis in order to determine the optimum values in temperature and distance. Based on the result of the experiment, infrared inspection technology can be used as a non-destructive inspection method and quality control for FRP-reinforced construction. However, the material subjected to FRP technology should be heated evenly and the temperature should be maintained at 5.9 ±2 °C. Moreover, the optimum distance for taking a picture with infrared thermograph is 3 meters to obtain a desirable result.


Keywords: Fiber Reinforced Polymer, Infrared Thermograph, Infrared Inspection Method, Non-Destructive Inspection


REFERENCES


  1. [1] Center for Advanced Structural Applications (CASA). “Inspection of Seismic Retrofit on the Arroyo Seco Bridge,” The Aerospace Corporation (1998).
  2. [2] Ye, F. Y., Zhu, G. D. and Zhang, G. Z., “The Development, Application and Expectation of Advanced Composite Material in RC Structure Reinforcement,” Journal of the Chinese Institute of Civil & Hydraulic Engineering, Vol. 29, No. 3, pp. 5768 (2002).
  3. [3] Chen, J. H., Lin, M. X., Zhu, G. D. and Shi, Z. Z., “Quality Management and Detection of Composite Reinforcement,” Industrial Materials, No. 142, pp. 120128 (1998).
  4. [4] Li, Y. F. and Zhu, G. D., “Study of Testing Standard for FRP Material and Construction Acceptance,” Structural Engineering, Vol. 15, No. 3, pp. 7399 (1990).
  5. [5] Zhu, G. D., Li, Y. F. and Shi, B. Z., “Application of FRP in RC Structure,” Modern Construction of Civil Engineering and Architectur, No. 239, pp. 7480 (1999).
  6. [6] Karbhari, V. M. and Seible, F., “Design Considerations for the Use of Fiber Reinforced Polymeric Composites in the Rehabilitation of Concrete Structures,” Proceedings of NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures, D. Duthinh, ed., Gaithersburg, Md, U.S.A., Vol. 5972, pp. 101108 (1999).
  7. [7] Watson, R., “Wrapping It: Fiber Reinforced Polymers A Cost Effective Solution for Extending the Life of our Aging Infrastructure,” ASTM Standardization New, pp. 2225 (2000).
  8. [8] Starnes, M., Carino, N. and Kausel, E., “Preliminary Thermograph Studies for Quality Control of Concrete Structures Strengthened with Fiber Reinforced Polymer Composites,” Journal of Materials in Civil Engineer, Vol. 15, No. 3, pp. 266273 (2003). doi: 10. 1061/(ASCE)0899-1561(2003)15:3(266)
  9. [9] Shi, B. Z., Li, Y. F. and Zhu, G. D., “RC Reinforcement Material and Methods,” Civil Engineering, No. 5, pp. 118127 (1998).
  10. [10] Hu, C. W., Use of Infrared-Red Thermography in Assessment of Structural Integrity, Mphil/Ph. D. Transfer Report, University of Glamorgan, Britain (2000).
  11. [11] Maldague, X. P. V., Nondestructive Evaluation of Materials by Infrared Thermography, pp. 192 (1993).
  12. [12] Delpak, R., Shih, J. K. C., Andreou, E., Hu, C. W. and Tann, D. B., “Thermographic Blister Detection in FRP Strengthened RC Elements and Degradation Effects on Section Performance,” FRP Composites in Civil Engineering, Teng, J. G., Elsevier, pp. 11351142 NCE (2001).
  13. [13] Hou, B. F. and Jiang, Z. F., Nondestructive Detection of Concrete, Seismological Press, China (1992).
  14. [14] Xiao, Q. S., Making of Far-infrared Radiant Ceramics, pp. 2122 (1995).