建構工單對機台分配的後設知識

Constructing Meta-Knowledge on Job-Machine Assignment

秦景輝(King-Fai Chun)

指導教授 ： 周雍強

國立臺灣大學/工學院/工業工程學研究所/碩士(2012年)

https://doi.org/10.6342/NTU.2012.02737

摘要

半導體製造產業的生產和服務系統中，批量生產方式已成為生產的主要工具之一，生產系統定必以「多樣小量」的形態為主流，而時間變數對於生產系統的控制，也是一個不可忽視的因素。
本研究以機台的兩種裝載方略 (Machine Loading Policy) 之機台設定機率模型 (Time Batching Policy、Job Batching Policy) 作為研究對象。兩種方略在不同產品組合之下，其時格大小 (Time Bucket Size) 與批量大小 (Batch Size) 如何影響機台設定次數，針對產品多樣性的製造，分析其機台設定機率，並以模擬軟體 (Arena) 設計之模型作為驗證之工具。在分析兩種方略時，發現不均勻的產品組合會得到較低的機台設定機率。及後利用易於時間控制的Time Batching Policy，以其計算出的機台設定機率作為工單對機台分配的依據，發現產品組合只跟工件種類數和到達率有關，與機台分配無關，從而歸納出Meta-Knowledge，免除於工單與機台限制改變時需要重新計算最佳生產排程時所耗費的時間。

關鍵字

Time Batching Policy ； Job Batching Policy ； 產品組合 ； Time Bucket Size ； Batch Size ； Meta-Knowledge

並列摘要

In the semiconductor manufacturing industry, Batch mode of production has become one of the main tools for production, the time variable for the control of the production system is important factor.
In this study, probability of setup model for two machine loading policy (Time Batching Policy and Job Batching Policy) is studied. Under a Product Mixes, Time Bucket Size and Batch Size how to affect the setup times for the product variety on the manufacturing system, and use simulation model on Arena as a tool for verification. Analysis of both policies and found that uneven product mixes will gain lower probability of setup. Design the Job-Machine Assignment Model based on Time Batching Policy, find that product mixes affected by arrival rate, rather than machine assignment. After generalize the Meta-Knowledge, exempt from recalculate the optimal production scheduling when the work orders or machine capability restrict are changed.

並列關鍵字

Time Batching Policy ； Job Batching Policy ； Product Mixes ； Time Bucket Size ； Batch Size ； Meta-Knowledge

參考文獻

[22] 張可興，2006， “產品多樣性對製造系統生產效率之影響模式” ，國立台灣大學工業工程學研究所碩士論文。

[23] 葉家佑，2005， “產品組合對平行機台工作分派效率之影響” ，國立台灣大學工業工程學研究所碩士論文。

[2] Benjaafar, S., Kim, J. S., and Vishwanadham, N., 2004, “On the Effect of Product Variety in Production–Inventory Systems,” Annals of Operations Research, Vol. 126, No. 1-4, pp. 71-101.

[4] Chiu, H. N., and Chang, J. H., 2005, “Cost Models for Lot Streaming in a Multistage Flow Shop,” Omega, Vol. 33, No. 5, pp. 435-450.

[6] Enns, S. T., 2001, “MRP Performance Effects Due to Lot Size and Planned Lead Time Settings,” European Journal of Operational Research, Vol. 39, No. 3, pp. 461-480.