乙太網路流量控管交換器之架構設計

Architectural Designs of the Ethernet Traffic Shaping Switch

廖邦廷(Pang-Ting Liao)

指導教授 ： 蔡志宏

國立臺灣大學/電機資訊學院/電信工程學研究所/碩士(2005年)

https://doi.org/10.6342/NTU.2005.03004

摘要

無資料

關鍵字

以太網路 ； 交換器 ； 流量控管

並列摘要

The thesis discusses several issues concerning traffic shaping with Ethernet switches. An integration of crossbar switch and departure event driven traffic shaping are proposed to provide various traffic shaping functions. The proposed switch is capable of handling variable sized packets. Also, reference models consisting of cascaded switches and shapers are devised for different scenarios and compared to proposed model. Finally, the delay bound of the proposed switch are calculated based on specific traffic constraints.

並列關鍵字

Ethernet ； Switch ； Traffic Shaping

參考文獻

[1] A.K. Parekh, R. G. Gallager, “A generalized processor sharing approach to flow control in integrated services networks: the single-node case”, IEEE/ACM Transactions on Networking, Volume: 1, Issue: 3, Pages: 344 – 357, June 1993.

[3] L. Georgiadis, R. Guerin, V. Peris, K. N. Sivarajan, “Efficient Network QoS Provisioning Based on per Node Traffic Shaping”, IEEE/ACM Transactions on Networking 4(4):pp. 482-501. 1996.

[4] A. Charny, “Providing QoS guarantees in input-buffered crossbars with speedup,” Ph.D. dissertation, M.I.T., Cambridge, Sept. 1998.

[5] ATM Forum, “Traffic Management Specification, Vers. 4.1,” March 1999.

[8]J. L. Rexford, A. G. Greenberg,.F. G. Bonomi, and A. Wong, “Scalable Architectures for Integrated Traffic Shaping and Link Scheduling in High- Speed ATM Switches,” IEEE Journal on Selected Areas in Communications, vol. 15, no. 5, pp. 938-950, June 1997.