Title

銀行營運間重新裝修工程空間與時程整合規劃之研究

Translated Titles

The Study of Space and Schedule Planning for Bank Remodel Construction

DOI

10.6841/NTUT.2011.00249

Authors

劉育志

Key Words

重新裝修 ; 設計結構矩陣(DSM) ; 銀行施工 ; 空間規劃 ; 排程進度規劃 ; Remodel works, Design Structure Matrix ; Bank construction ; Space Planning ; Schedule planning

PublicationName

臺北科技大學土木與防災研究所學位論文

Volume or Term/Year and Month of Publication

2011年

Academic Degree Category

碩士

Advisor

林祐正

Content Language

繁體中文

Chinese Abstract

施工規劃工作常扮演設計端與施工端的橋架角色,透過工程整合規劃將設計內容轉換為施工可行方案以利後端工程執行與管理;故雖貴有卓越設計成果,但乏有詳實規劃,於後施工過程中可能因為資源分配不當,不僅無法達成設計要求,亦可能發生作業衝突,或影響施工安全、品質、工期及成本。本研究以國內金融銀行重新裝修為例,探討在營業無中斷情形下進行全面裝修施工,因而無法按照往常一般工序安排施工作業;故同空間中必須同時滿足營業與施工兩種衝突行為問題發生。藉由文獻回顧尋找空間衝突解決對策與規劃法則,在營業行為優先使用的前提下,調整非營業空間作為施工空間,再隨著局部空間完工再重新調整營業與施工空間,因此形成動態空間配置之施工排程問題。透過分區與排程分析,將複雜交錯且離散無邏輯之空間與時間訊息予以探討研擬後,整理建構出一適當可用之排程規劃模式,期能以提高施工空間並行度與最少的臨時轉置空間設置量,以達撙節臨時設施建置成本為目標。另於進度排程規劃過程中,試導入設計結構矩陣Design Structure Matrix (簡稱DSM)為排程進度運算規劃工具,作為日後規劃可應用系統程式化工具。 本研究最後透過實例導入模式以驗證可行性,視個案條件所給定起始施工空間為初始解,後序即依本模式選定多重路徑之優化配置;並於進度排程規劃過程中,採行DSM進行快速分析、運算、分群與進度排定,如遇反覆修正初始值時,可快速提供後續之路徑規劃解,故可大幅提升規劃效率。而本研究所提出的空間排程規劃模型與運算工具,經本研究驗證後可作為日後空間規劃之參考與工具。

English Abstract

Project planning plays an important role in construction management. In the bank remodel construction, it needs to consider the integration of time and space problem special in schedule plan. The reason is that bank is still need to open during the remodel construction. In order to improve the above problem, the study applies design structure matrix (DSM) methodology to consider the integration of schedule and space issue for project managers. Based on literature review, DSM has proven effective at helping construction design teams streamline processes to address nonlinearity by iteration and complexity in design. The proposed DSM-based remodel schedule approach offers a means to represent, analyze, and decompose complex systems in order to improve the space-based limitation consideration. The proposed DSM-based remodel schedule approach is applied in selected case studies of Taiwan bank projects to verify our proposed methodology and demonstrate the effectiveness of schedule management. Project managers can take advantage of proposed approach to assist schedule planning using DSM-based software. With the evaluation of the two case studies in the Taiwan bank projects, the results show that DSM-based remodel schedule approach is effective in enhancing schedule planning for bank remodel construction projects.

Topic Category 工程學院 > 土木與防災研究所
工程學 > 土木與建築工程
工程學 > 市政與環境工程
Reference
  1. [2] Zouein, P. P. and Tommelein, I. D., “Dynamic layout planning using a hy-bird incr-emental solution method.” Journal of Construction Engineering and Management, ASCE, vol.125, no6, 1999, pp.400-408.
    連結:
  2. [4] Thabet, W. Y. and Beliveau, Y. J., “Modeling work space to schedule repetitive floors in multistory buildings” Journal of Construction Engineering and Management, ASCE, vol.120, no4, 1994, pp.96-116.
    連結:
  3. [5] Thabet, W. Y. and Beliveau, Y. J., “SCaRC: Space-Constrained Resource-Constrained Scheduling System” Journal of Computing in Civil Engineering, ASCE, vol.11, no1, 1997, pp.48-59.
    連結:
  4. [6] Tyson R Browning, “Applying the design structure matrix to system decomposition and integration problems: A review and new direction,” IEEE transactions on engineering management, vol. 48, no.3, 2001, pp.292-306.
    連結:
  5. [8] Ali Yassine, Donald R. Falkenburg and Ken Chelst, “Engineering Design Mana-gement: An Information Structure Approach”, International Journal of Producti-on Research, vol.37, no13, 1999, pp.2957-2975.
    連結:
  6. [10] Donald V Steward, “The Design Structure System: A Method for Managing the Design of Complex Systems”, IEEE Transactions on Engineering Management vol.28, 1981, pp71-74.
    連結:
  7. [11] Browning, T. & Eppinger, S., “Modeling Impacts of Process Architecture on Cost and Schedule Risk in Product Development,” IEEE Transactions on Engineering Management, vol.49, no4, 2002, pp428-442.
    連結:
  8. [12] Soo-Haeng Cho and Steven D. Eppinger, “A simulation-based process model for managing complex design projects”, IEEE Transactions on Engineering Management, vol.52, no3, 2005, pp316-328.
    連結:
  9. [14] Grose David L., “Reengineering the aircraft design process” Proceeding Fiveth AIAA/USAF/NASA/ISSMO symposium on multidisciplinary analysis and optimaza-tion, Panama City Beach, FL, September ,1994.
    連結:
  10. [22] Fernandez, C.I.G. Integration Analysis of Product Architecture to Support Effective Team Co-Location. Master's Thesis (ME), Massachusetts Institute of Technology, Cambridge, MA, 1998。
    連結:
  11. 期刊論文
  12. [1] Zouein, P. P. and Tommelein, I. D., “Interactive dynamic layout planning.” Journal of Construc tion Engineering and Management, ASCE, vol19, no2, 1993, pp.266-287.
  13. [3] Riley, D. R.and Sanvide, V. E., “Space planning method for multistory building co-nstruction” Journal of Construction Engineering and Management, ASCE, vol.123, no2, 1997, pp.464-473.
  14. [7] Ali Yassine, “An Introduction to Modeling and Analyzing Complex Product Development Processes Using the Design Struction Matrix (DSM) Method” Quaderni di Management (Italian Management Review), www. Quaderni -di- management. it, no.9, 2004.
  15. [9] Thomas A. Black, Charles H Fine and Emanuel M Sachs, “A Method for Syst-ems Design Using Precedence Relationships: An Application to Automotive Br-ake Systems” Sloan Working Papers, Massachusetts Institute of Technology Ca-mbridge, Massachusetts 02139, 1990.
  16. 會議論文
  17. [13] Akinci,B., Fischer,M. and Zabelle, T., “Proactive approach for reducing non-value adding activities due to time-space conflicts. ”Proceeding Sixth Annual Construction, Guaruja, Brazil, August, 1998。
  18. [15] 陳宥儒,「設計結構矩陣於辦公椅產品開發之流程管理」,台灣感性學會研討會論文,東海大學,台中,2010,第391-396頁。
  19. 學位論文
  20. [16] 吳俊達,建築工程施工作業空間規劃與衝突分析流程之研究,碩士論文,國立台灣大學土木工程學研究所,台北,2000。
  21. [17] 謝佳玲,建築專案設計流程規劃之研究,碩士論文,國立台灣科技大學營建工程系研究所,台北,2009。
  22. [18] 郭奉宜,統包工程之進度規劃模式,碩士論文,國立交通大學土木工程學系,新竹,2005。
  23. [19] 曾健鴻,矩陣邏輯運用在設計作業之研究,碩士論文,國立台灣科技大學營建工程系研究所,台北,2008。
  24. [20] 鄧煥友,以設計結構矩陣為基底之流程與分工結構圖整合機制,博士論文,國立中央大學資訊工程學系,桃園,2010。
  25. [21] 陳璽,模糊計畫評核技術在組裝程序之研究-以自行車避震器組裝為例,碩士論文,東海大學工業設計學系碩士班,台中,2010。
  26. 參考網頁
  27. [23] 設計結構矩陣網址, http://www.dsmweb.org/, 2011/05。
  28. [24] RedTeam Managing Complex Systems, Web site, http://www.redteam.se, 2011/05.
  29. [25] PSM 32 Version 3.9j (Jump), Web site, http://www.problematics.com, 2011/05.