透過您的圖書館登入
IP:3.139.90.131
  • 期刊
  • OpenAccess

Design and Fabrication of Multilayer HTS Filters

並列摘要


A multilayer HTS band-pass filter has been designed and fabricated. Tapped combline filters with multilayer structure were designed. The center of frequency of the pass band is at 1.9 GHz with band width of 50 MHz. YBCO thin films deposited on LaAlO3 substrates were used to construct the filter. Wet etching method was used to etch the designed patterns. The transmission and reflection coefficients were determined at liquid nitrogen temperature 77 K. The measured and simulated S-parameter values were compared.

並列關鍵字

無資料

被引用紀錄


莊世璋(2009)。軟性神經探針之三維組裝的設計與製程〔碩士論文,國立清華大學〕。華藝線上圖書館。https://doi.org/10.6843/NTHU.2009.00432
Tsai, F. Y. (2013). 利用複合式奈米球微影術製作對可見光具高穿透結構之研究 [master's thesis, National Chiao Tung University]. Airiti Library. https://doi.org/10.6842/NCTU.2013.00532
謝章宏(2013)。雙足步行機器人於未知斜面之姿態控制設計〔碩士論文,國立交通大學〕。華藝線上圖書館。https://doi.org/10.6842/NCTU.2013.00209
吳世基(2012)。旋形量與熱處理對D6AC鋼電子束銲件機械性質之影響〔博士論文,國立交通大學〕。華藝線上圖書館。https://doi.org/10.6842/NCTU.2012.00539
Cho, T. L. (2017). 台灣半導體企業社會責任之內部與外部影響 [doctoral dissertation, Chung Yuan Christian University]. Airiti Library. https://doi.org/10.6840/cycu201700146

延伸閱讀