- 期刊
圓柱型雷射二極體模組構裝（TO-CAN型）基座沖鍛複合模具開發研究
Research of Cold forging Progressive Die Process for TO-CAN Header
摘要
本文針對圓柱型雷射二極體模組構裝基座沖鍛複合模具進行開發研究，藉由工程規劃之探討、Deform電腦模擬之分析以及局部之成形試驗，尋求可行之成形製程，並經由板材沖鍛連續製程，結合鍛造模與連續模之特性，以生產高精度之TO-CA基座鍛件，降低其整體製造成本，包括人工、設備、製程前、中、後之處理等，亦針對沖鍛連續模中可能產生之問題加以檢討並提出對策。
關鍵字
無資料並列摘要
The purpose of this paper is to find an available production die for forming process, by the research of process planning, deform simulation and local forging test. Meanwhile, by use of cold forging progressive die, we can produce high precision cold forged TO-CAN Header and combine both cold forging's and progressive die's characteristics. Reduce the total cost including manpower equipment and the treatment before during and after process. In addition, we discuss the possible problem caused by adapting forging process in progressive die.
並列關鍵字
無資料延伸閱讀
- 李元發、方彥博、劉如豐、柯順升、張隆武、賴豊文（2018）。並聯多晶體雷射自動耦光構裝平台之設計開發。機械工業雜誌，(419)，42-51。https://www.airitilibrary.com/Article/Detail?DocID=P20171221002-201802-201802060021-201802060021-42-51
- 鄭東辰（2007）。TO-can型殼蓋引伸壓印複合連續模具開發。鍛造，16(1)，24-28。https://doi.org/10.29791/Forging.200706.0005
- 王仁椲（2005）。精巧型雷射直寫系統及繞射元件之研製〔碩士論文，國立虎尾科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0028-1501201314420943
- 蕭明哲（2011）。Stress Analysis of the Forging Die for an Air-Bag Manifold〔碩士論文，國立虎尾科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0028-2701201123534900
- 林恆勝（2001）。Precision Cold Forging Progressive Die Technology for the Turntable of the Spindle Motor。鍛造，10(4)，19-22。https://doi.org/10.29791/Forging.200112.0002