- 期刊
Development of 3D Electron Beam Lithography Fabrication Simulator
並列摘要
Although electron beam lithography has been demonstrated to have distinguished performance in creating 3D micro polymer structures, the process design for creating the desired shape still largely depends on a trials and errors basis. Acellular automata based process emulator is developed and presented under an OpenGL environment for reducing the cost and shortening the development period of the process. By using a convolution approach, this emulator converts the processing parameters into the final spatial dosage distribution and subsequently, the final geometry of structures. Examples of 3D micro structures such as micro lens are presented. By the tool, it is possible to provide guidelines for optimizing the fabrication process and reducing the cost for the related e-beam lithography based 3D fabrication.
延伸閱讀
- 蔡永坤（2009）。Research and Design of Semiconductor Lithography Overlay Metrology Simulation System〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2009.02416
- Chuang, W. L. (2009). Fabrication and characteristic study of silicon tip arrays for electron beam lithography [doctoral dissertation, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2009.01376
- Chen, S. C. (2009). FABRICATION AND MANUFACTURABILITY ANALYSIS OFMEMS-BASED ELECTRON LENS FOR ELECTRON BEAM DIRECT-WRITE LITHOGRAPHY [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2009.01892
- 陳孟忻（2011）。Applications of Groundable Substrates in Electron Beam Lithography〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2011.10132
- 郭逸宏（2012）。Electron Beam Position and Drift Detection through Silicon Photodiodes in Electron Beam Lithography System〔博士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2012.01381