透過您的圖書館登入
IP:3.128.199.210

並列摘要


This paper shows an experimental investigation developed in laboratory and in mix-plant for the validation of an asphalt concrete (AC) produced through the hot mix recycling (HMR) technique. A specific rejuvenator was used to improve the mechanical characteristics of the AC containing reclaimed asphalt (RA). The optimum dosage of the rejuvenator was selected on the basis of the viscosity of the bitumen recovered from RA. The AC produced with the optimum dosage of rejuvenator and 30% of RA was characterized in laboratory by means of indirect tensile strength (ITS) and indirect tensile stiffness modulus (ITSM). The results obtained in laboratory were validated by testing the AC produced in a mix-plant. The Fourier transform infrared spectrometry (FT-IR) was used to evaluate the interaction between rejuvenator and bitumen and to check the presence of the rejuvenator to produce the AC in the mix-plant.

參考文獻


Bocci, M., Canestrari, F., Grilli, A., Pasquini, E., and Lioi, D. (2010). Recycling Techniques and Environmental Issues relating to the Widening of a High Traffic Volume Italian Motorway, International Journal of Pavement Research and Technology, 3(4), pp. 171-177.
Bocci, M., Grilli, A., Cardone, F., and Ferrotti, G. (2012). Full Depth Reclamation for the Rehabilitation of Local Roads: a Case Study, International Journal of Pavement Engineering, DOI:10.1080/10298436.2012.657196, available online February 16, 2013.
Su, K., Hachiya, Y., and Maekawa, R. (2009). Study on recycled asphalt concrete for use in surface course in airport pavement, International Journal of Resources, Conservation and Recycling, 54, pp. 37-44.
Oliveira, J., Silva, H., Abreu, L., and Pereira, P. (2012). Effect of different production conditions on the quality of hot recycled asphalt, Procedia – Social and behaviour sciences, 53, pp. 266–275.
Karlsson, R. and Isacsson, U. (2006). Material-related aspects of asphalt recycling: State-of-the-art, Journal of Materials in Civil Engineering, 18(1), pp. 81-92.

被引用紀錄


李應崇(2006)。利用懸臂樑結構設計與製作之CMOS-MEMS微質量感測器〔碩士論文,國立清華大學〕。華藝線上圖書館。https://doi.org/10.6843/NTHU.2006.00354
林群揚(2012)。基於節點移動預測之通道分配演算法〔碩士論文,元智大學〕。華藝線上圖書館。https://doi.org/10.6838/YZU.2012.00331
Chang, P. J. (2016). 應用於生醫電子的三角積分類比數位轉換器 [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU201602474
張紫煥(2015)。阿拉伯芥FAR-RED INSENSITIVE219與Cryptochrome2 的交互作用對藍光和茉莉酸訊息傳遞之整合的功能性研究〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2015.02355
廖芸禪(2014)。某區域教學醫院病患特性與72小時內再返急診之相關性〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2014.01604

延伸閱讀